tell what our shade shelter should be like, using what we know about sunlight, colors and materials.
Phase 3: Make Sense
Material table! Your teacher shows paper, cloth, a clear plastic sheet and foil. Hold each one up to the window light.
Which one blocks the most sunlight?
The reading opens over the lesson; close it to come back to exactly where you were.
Engineers describe. Before building, engineers tell what the tool should be like. They use science they know.
Block sunlight. Our shelter must block sunlight. A clear cover lets sunlight through. A cloth or thick paper cover blocks it.
Light color on top. Our paper test showed light colors stay cooler. A white or light top is a good idea.
Worked example 1: Kai’s idea. Kai said, “Our shelter needs a white cloth top. White stays cooler, and cloth blocks the sun.” Kai used two science ideas.
Worked example 2: Amira’s idea. Amira said, “It should be big enough to make shade over our play spot. And it should stand up strong.” Amira thought about the people who will use it.
Our shelter list. Blocks sunlight. Light color on top. Big enough for the spot. Stands up. Next part, we build it!
Your teacher reads each one. Point to your answer.
Plan picture.
Draw your idea for our shade shelter. Color the top. Show the shade under it.
Circle two things on the shelter list your idea has. Tell a friend why.
We know what our shelter should be like. In our next part, we build and test it!
Exit ticket: tell your teacher one thing our shelter must do and why.
Pacing: warm-up 6 min, read-aloud 7, mini lecture 8, guided practice 10, plan picture 9.
Materials: sample squares of cloth, thick paper, clear plastic sheet, foil, a net; the shelter list on chart paper.
Note: keep this to describing. Building and testing belong to part 2 (K-PS3-2). Shiny foil reflects well but can glare; let children notice, and say we will try materials later.
Misconceptions: “Clear plastic makes shade because it is a cover.” Hold it to the window to show light passes through.
Answer guide: our shelter must block sunlight (makes shade), have a light top (stays cooler), be big enough, and stand up.
U.S. Environmental Protection Agency, Using Cool Roofs to Reduce Heat Islands · U.S. government work, public domain
A roof is a cover. It sits on top of a building. Builders choose what the roof is made of.
Some builders choose a cool roof. A cool roof bounces back lots of sunlight. It soaks up less of the Sun’s warmth.
Then less warmth goes into the house below. On a sunny day, a home with a cool roof can stay a bit cooler inside.
The most important thing about a cool roof is how much sunlight it bounces back. Light colors bounce back more sunlight.
Builders also think about cleaning. A dirty roof does not bounce as much light. So some cool roofs need to be kept clean.
Our shade shelter will have a cover on top, too. It is like a little roof. What color should it be? What should it be made of?
Source: U.S. Environmental Protection Agency, Using Cool Roofs to Reduce Heat Islands (epa.gov)