build two bumpers from our drawings and test each one three times.
Phase 4: Build
Builder’s warm-up. Stretch your arms up high. Wiggle your building fingers. Today you turn your drawings into real bumpers!
What do we build from today?
The reading opens over the lesson; close it to come back to exactly where you were.
Engineers, it is build day! Your team picks your two best drawings. Bumper A and Bumper B.
Our job and rules, one more time. The bumper must turn the ball. It must send the ball into the goal. Use blocks, cardboard and tape. One gentle push from the start line. No hands after the push. The bumper stays still.
Three tries each. Roll the ball at Bumper A three times. Then roll at Bumper B three times. Each time, mark the chart: a goal mark if it went in, an X if it missed.
Worked example 1: Lena’s team builds. Lena’s team builds Bumper A, a slanted block wall. They tape the blocks to the floor so the wall stays still. They build Bumper B, a curved cardboard wall. They tape both ends.
Worked example 2: Omar marks the chart. Omar is the recorder. Bumper A: goal, goal, X. Bumper B: X, goal, X. Omar counts. Bumper A got 2 goals. Bumper B got 1 goal. These are sample results.
| Bumper | Try 1 | Try 2 | Try 3 | Goals in all |
|---|---|---|---|---|
| Bumper A | ||||
| Bumper B |
Team jobs: Builder, Roller, Recorder, Ball Getter. Check in with your teacher after each bumper.
Show what happened.
Count the goal marks for Bumper A and Bumper B. Color one box for each goal on your picture chart.
Draw the bumper that worked better. Show the ball's path with an arrow.
Two real bumpers and a full chart! Next time we read our chart like scientists.
Tell your team: did our bumper make the ball move the way we wanted? Thumbs up, sideways or down.
Pacing: warm-up 3, read-aloud 5, mini lecture 6, building 10, testing 10, picture chart 4, closure 2.
Materials (per team of 4): 10-12 unit blocks, two cardboard strips (teacher-cut, about 30 by 60 cm), masking tape, soft ball, team chart with Bumper A / B rows. Use one shared start line and goal per lane; run 2-3 lanes.
Likely misconceptions: children nudging the ball after it starts (“helping”); counting a miss as a goal. Name the rule kindly and re-roll.
Supports: photo each team’s two bumpers for 1.20 and 1.21; keep bumpers built overnight if possible.
Answer guide: picture charts match the team’s marks; drawings show the bumper with more goals. Thumbs reflect results honestly; praise a thumbs-down as useful evidence.
NASA Jet Propulsion Laboratory Education, Engineering Design Process Flow Chart · NASA/JPL-Caltech; linked and retold in our own words
Remember the NASA chart of engineering steps? We found our problem. We thought of ideas. We picked designs. Now comes the busy part!
The next step is to build a model. A model is a real thing you can touch. It shows if your idea can work. Some engineers call a first model a prototype. That is a long word for “first try.”
After you build, you test. Testing means you try it out and watch what happens. Then you think about it. Did it do the job?
NASA engineers test things many times. One try is not enough. A thing might work once by luck. When it works again and again, you can trust it.
Today we build two bumpers. We test each one three times. We put a mark on our chart for every try. A happy goal mark means the ball went in. That chart will help us next time.
Source: NASA Jet Propulsion Laboratory Education, Engineering Design Process Flow Chart (jpl.nasa.gov)