draw two bumper ideas and tell how each shape will push the ball to the goal.
Phase 4: Build
Shape hunt! The teacher holds up three cards: a flat line, a slanted line, and a curve like a smile. Trace each one in the air with your finger.
The ball rolls straight at a flat wall. Where will it go?
The reading opens over the lesson; close it to come back to exactly where you were.
Engineers draw before they build. A drawing is a plan. It shows the shape of your bumper. It shows where it sits on the floor.
Remember our job. Our bumper must make the ball change direction. It must send the ball into the goal. We use only blocks, cardboard and tape. One gentle push. No hands after the push.
Shape matters. The ball bumps the bumper. The bumper pushes back. The shape and the slant of the bumper decide which way the ball goes next.
Worked example 1: Sofia’s slanted wall. Sofia draws a long block wall. She tips it on a slant, like a slide. She draws an arrow. The ball rolls in, bumps the slant, and turns toward the goal. Sofia says, “The slant points the ball to the goal.”
Worked example 2: Diego’s curved wall. Diego draws a piece of cardboard bent into a curve. He draws the ball sliding along the curve and coming out toward the goal. Diego says, “The curve turns the ball a little at a time.”
Your turn. Draw two ideas. Draw the start line, the ball, the bumper and the goal. Add an arrow to show the ball’s path.
Look at the teacher’s drawings on the board. Point and tell.
Use the two-box drawing sheet.
Box 1: draw bumper idea 1. Box 2: draw bumper idea 2. Draw the start line, the ball, the bumper and the goal. Add an arrow for the ball's path.
Tell your teacher how the shape in one drawing helps the ball get to the goal.
Two ideas each! Next time we test bumper shapes on the floor and see which way the ball really goes.
What did we make today?
Pacing: warm-up 5, read-aloud 6, mini lecture 8, guided 8, drawing 10, closure 3.
Materials: two-box drawing sheets with the start line and goal pre-printed, crayons, shape cards (flat, slanted, curved).
Likely misconceptions: drawing a bumper behind the goal, or drawing the ball going in with no bump. Ask, “Where does the ball touch the bumper?”
Supports / stretch: offer cut-out bumper shapes children can glue on the sheet. Stretch: draw a bumper made of two pieces.
Answer guide: a strong sketch shows the bumper in the ball’s straight path, with an arrow that bends at the bumper toward the goal. A strong telling names the shape (“slanted,” “curved”) and says it pushes or points the ball to the goal.
NASA Jet Propulsion Laboratory Education, Engineering Design Process Flow Chart · NASA/JPL-Caltech; linked and retold in our own words
NASA engineers build rovers and spacecraft. They follow steps, like a path with arrows. A NASA chart shows the steps.
Step one: find the problem. We did that! Our ball rolls past the goal.
Step two: think of ideas. Engineers call this brainstorming. That means you think of lots of ideas, fast. Silly ideas are okay. One idea can help you think of a better one.
Step three: pick a design. A design is a plan for what you will build. Engineers look at their ideas. They choose the ones that fit the job best.
After that, they build a model. Then they test it. If it does not work yet, they go back. They build and test again.
Today we are on steps two and three. You will draw two bumper ideas. A drawing is a great way to show an idea before you build it. Then your team will look at both drawings.
Source: NASA Jet Propulsion Laboratory Education, Engineering Design Process Flow Chart (jpl.nasa.gov)