
arrange video clips, audio, titles and still images on a timeline in Shotcut or Kdenlive; trim, split, unlink, speed up or slow down and change the transparency of clips; apply transitions, keyframed motion, filters and text; synchronize music and sound effects with the picture; and apply one advanced technique, a chroma key or a split screen.
Instruction
Two free editors. Shotcut is a free, open-source, cross-platform video editor for Windows, Mac and Linux, released under the GPLv3 licence; Kdenlive, from KDE, is a free and open-source editor for Linux, Windows, macOS and BSD. Neither needs an account. The steps below use Shotcut’s menus, from its feature list, FAQ, keyboard shortcut reference and user guide; this lesson’s reading gives the Kdenlive equivalent for each from the Kdenlive manual. Save often, and use File > Backup and Save before any big change.
Set up the project. The Shotcut User Guide calls the Video Mode the most critical setting, because it fixes the resolution, aspect ratio and frame rate. If you leave it on Automatic, Shotcut copies the first file you drag in and locks that in. Choose it yourself: 1080p, 16:9, at the frame rate you recorded (YouTube’s upload guidance says to keep the frame rate you recorded at).
Arranging the timeline (MM.VID.4). A trailer is built in layers. Put gameplay and the devlog shot on track V1 in story order, titles and still images (your logo PNG, the title card) on V2 above them, music on one audio track and sound effects on another. Shotcut’s timeline shortcuts are A to append, V to insert and B to overwrite. A common 60-90 second shape: a 0-10 second hook with your strongest gameplay, because Steam notes that a viewer may give you less than 10 seconds and builds its 6-second microtrailer from six 1-second clips of your first trailer; then the core loop, then escalation, then the title, and an end card with the game’s name and your credit line.
Manipulating clips (MM.VID.5). Trim by dragging a clip’s edge, or with I and O at the playhead; split a clip at the playhead with S. Removing a section with Ripple Delete (X) closes the gap, while Lift (Z) leaves a gap. The Properties panel holds a clip’s settings: Speed has presets such as 0.5 (slower) and 2.0 (faster) and adjusts the clip’s duration to match, and Pitch Compensation keeps voices natural for small speed changes (for large ones, mute the audio). Rotation and aspect ratio overrides fix a phone clip that was detected wrongly. Transparency comes from the Opacity filter, or from fading a clip in and out with the fader controls on the timeline. To unlink sound from picture, Shotcut can detach a clip’s audio onto its own audio track, so you can delete the game sound under a music section or slide a voice line. In Kdenlive, a clip with sound is split onto a video track and an audio track when you drop it, and the two parts are grouped, so they move together; ungroup to unlink them and group them again to relink.
Transitions, keyframes, filters and text (MM.VID.6). In Shotcut you make a transition by overlapping two clips on the same track. The default is a Dissolve; the Properties panel offers wipes such as Iris and Barn Door, an audio Cross-fade, and Cut, which keeps a hard picture change. Use few: hard cuts on the beat for action, a dissolve to show time passing, a fade from black at the start. Filters do the rest. Text: Simple or Text: Rich writes captions, which matter because Steam viewers may watch muted; Size, Position & Rotate scales or moves a clip. Keyframes make a filter change over time: Shotcut’s simple keyframes set a start value that animates in and an end value that animates out, so your logo can grow in, hold and shrink away. The full Keyframes panel allows any number of points.
Synchronizing audio with video (MM.VID.7). Music drives a trailer’s rhythm. Play the music track and press M on each strong beat to drop markers; with snapping on, cut points and clip edges snap to them. Line up each sound effect with the exact frame of its on-screen hit, check the devlog clip’s lips or hands match its sound, and lower the music under any voice. Shotcut 26.9 added Automatic Audio Ducking for that, and its Align To Reference Track tool lines up clips by matching similar audio, for example a phone recording and a separate recording of the same moment.
One advanced technique (MM.VID.8). Choose one. Chroma key: film yourself or your hands in front of a smooth, evenly lit green or blue sheet or poster board, a little in front of it so you cast no shadow on it, and do not wear the key color. Put that clip on V2 and gameplay on V1, add Chroma Key: Simple, pick the Key color with the dropper and raise Distance until the sheet disappears but your edges stay; the Key Spill filters clean colored fringes. Split screen: the user guide suggests a rectangle mask (Mask: Simple Shape) to crop a clip so two videos sit side by side; or shrink each clip with Size, Position & Rotate. Your hands on the controller beside the gameplay they cause is a strong devlog image.
Low-spec computers. If playback stutters, turn on Settings > Proxy > Use Proxy, or set Settings > Preview Scaling to 360p; the export still uses the full-quality files.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Build: Cutting the Trailer: Timeline, Clip Controls, Effects, Beat Sync and One Advanced Shot
Question. Can you assemble a 60-90 second trailer whose cuts land on the music, whose clips are trimmed, timed and layered with purpose, and which uses one advanced technique cleanly?
Materials
- A computer with Shotcut or Kdenlive installed (free, no account)
- Your files from Lesson 5.1: gameplay takes, devlog takes, room tone, logo PNG, title card and screenshots
- Music and sound effects you made yourself in Audacity, or CC0/CC BY sounds with a credit line
- For chroma key: a smooth green or blue bedsheet, tablecloth or poster board, painter’s tape or clips, and a lamp; for split screen: two clips only
- Headphones, and this lesson’s reading (beat map sheet, Shotcut and Kdenlive command card, chroma key checklist)
- Hang a key sheet with tape or clips from a height you can reach standing on the floor; do not climb on furniture, and ask an adult to help with anything higher.
- Keep lamps away from the sheet and other fabric, and run cords where nobody can trip.
- Film for the key shot only yourself or, with a parent’s OK, household members who agree.
- Keep headphone volume moderate and take a short screen break at least every 30 minutes.
Procedure
- Start a new project with the Video Mode set to 1080p 16:9 at your recorded frame rate. Open the reading’s beat map and plan the hook (0-10 s), core loop, escalation, title and end card, with a target length between 60 and 90 seconds.
- Put the music on an audio track, play it, and press M on every strong beat to drop markers. Turn snapping on.
- Arrange gameplay and devlog clips on V1 in beat-map order, and the logo, title card and a screenshot on V2. Trim each clip and split with S so cuts land on markers; use Ripple Delete to close gaps.
- Manipulate at least three clips: change one clip’s speed in Properties (for example 0.5 for a slow-motion hit, with the audio muted), fade one clip’s opacity in or out, and detach (Shotcut) or ungroup (Kdenlive) one clip’s audio so you can delete or move it.
- Add effects: one dissolve and one fade from black, a Text: Simple caption that states what the player does, and a keyframed Size, Position & Rotate on the logo so it grows in and holds.
- Synchronize sound: put each sound effect on its own track exactly on its on-screen hit, check the devlog clip’s sound against its picture, and duck the music under any voice.
- Do the advanced technique: chroma key (film a 5-second key shot, put it on V2 over gameplay on V1, add Chroma Key: Simple and adjust Key color and Distance) or split screen (two clips side by side with Mask: Simple Shape or Size, Position & Rotate).
- Export a draft with the Default preset, watch it twice with sound and once muted, write three fixes in the edit log, make them, and save the project.
Data
| Time (s) | Beat or marker | Clip and track | Edit used (trim, split, speed, opacity, detach) | Effect or text | Sound synced |
|---|---|---|---|---|---|
| 0-10 | Hook | ||||
| 10-40 | Core loop | ||||
| 40-70 | Escalation | ||||
| 70-90 | Title and end card |
Check: total length between 60 and 90 s; at least one speed change, one opacity change, one unlinked audio clip, two transitions, one keyframed filter, one caption, one advanced technique.
Analysis
- Find two cuts that land on a beat and one that does not. Watch them again: what does the off-beat cut do to the feeling, and is it worth keeping?
- Why did you detach or ungroup audio on the clip you chose, and what would have gone wrong if the picture and sound had stayed linked?
- Judge your advanced shot: for chroma key, which Distance value removed the sheet without eating your edges and why; for split screen, does the viewer understand how the two halves relate within two seconds?
If you cannot do this build in person: On a slow computer, turn on proxy editing or 360p Preview Scaling, keep to two video tracks and render a draft only at the end. Without a key sheet, do the split screen instead. If neither editor will install, build the whole cut on paper: a beat map with timings, a clip list with in and out points, speed and opacity notes and a sketched split-screen frame, then cut what you can in Godot by recording a scripted in-game camera sequence with OBS.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Missouri standard: MM.VID.4, MM.VID.5
In Shotcut, press to drop a marker on a music beat, then press to split the clip at the playhead so the cut lands on that beat.
Missouri standard: MM.VID.5
A gameplay clip’s loud game sound clashes with your music for ten seconds, but you want to keep its sound elsewhere. What should you do?
Missouri standard: MM.VID.6
You want your logo to grow in over the first second, hold, then shrink away at the end. Which tool does this in Shotcut?
Missouri standard: MM.VID.7
Your music has a strong drum hit every 0.5 seconds. You place a sword-swing sound effect three frames after the on-screen swing. What will a viewer notice, and what is the fix?
Missouri standard: MM.VID.8
You filmed your hands in front of a green sheet and want them over gameplay. How do you set up the tracks and the filter in Shotcut?
Missouri standard: MM.VID.4, MM.VID.5, MM.VID.6, MM.VID.7, MM.VID.8
Paste your beat map and edit log. Give the trailer’s length and the tracks you used, then name one example of each: a trim or split, a speed change, an opacity change, an unlinked audio clip, a transition, a keyframed filter, a caption, an effect synced to a hit, and your advanced technique with its settings. End with the three fixes you made after watching the draft muted and with sound.
How confident are you that you can arrange clips, titles, stills and audio on a timeline, trim and adjust clips, apply transitions, keyframes, filters and text, sync sound to picture, and use a chroma key or split screen?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- What do these Shotcut keys do on the timeline: A, V, B, S, X, Z, M?
Check your answer
Answer: A append; V insert; B overwrite; S split at the playhead; X ripple delete (closes the gap); Z lift (leaves a gap); M drop a marker.Turn snapping on so cuts and clip edges snap to markers. - Why does the Shotcut User Guide call the Video Mode the most critical setting, and what happens if you leave it on Automatic?
Check your answer
Answer: It fixes the project’s resolution, aspect ratio and frame rate. On Automatic, Shotcut copies the first file you drag in and locks that in.Choose it yourself: 1080p, 16:9, at the frame rate you recorded. - Match the transition to its use: hard cut, dissolve, fade from black.
Check your answer
Answer: Hard cuts on the beat for action; a dissolve to show time passing; a fade from black at the start.Use few transitions; in Shotcut you make one by overlapping two clips on the same track.
Application
Use the skill in context. Show your reasoning.
- A 4-second clip is set to Speed 0.5, and a 6-second clip to Speed 2.0. How long is each on the timeline? What should you do with the audio of the slow-motion clip?
Check your answer
Answer: 8 seconds and 3 seconds. Mute the slow-motion clip’s audio (Pitch Compensation suits only small speed changes).4 ÷ 0.5 = 8 and 6 ÷ 2.0 = 3; Shotcut adjusts the duration to match the speed. - Your music has a strong beat every 0.5 seconds and the project runs at 30 fps. How many frames apart are the beats? A sound effect placed three frames late is how many seconds late?
Check your answer
Answer: 15 frames apart; 0.1 seconds late.0.5 × 30 = 15 frames. 3 ÷ 30 = 0.1 s. Even a few frames of lag makes a hit feel weak; snap the effect to the frame of the hit. - Plan a trailer: hook 10 s, core loop 30 s, escalation 30 s, title and end card 15 s. What is the total, and is it inside the 60-90 second target? Why must the hook be the strongest gameplay?
Check your answer
Answer: 85 seconds, inside the target. Steam notes a viewer may give a trailer less than 10 seconds, and its 6-second microtrailer is built from six 1-second clips of your first trailer.10 + 30 + 30 + 15 = 85. - Set up a chroma key in Shotcut: which track gets which clip, which filter, and what do Key color and Distance do? Give two filming rules for the key shot.
Check your answer
Answer: Hands (key) clip on V2, gameplay on V1; add Chroma Key: Simple to the hands clip; Key color (picked with the dropper) sets the color removed and Distance sets how close a shade must be to be removed. Filming: a smooth, evenly lit green or blue sheet, with you a little in front so you cast no shadow on it, and do not wear the key color.Key Spill filters clean colored fringes. Raise Distance until the sheet disappears but your edges stay. - Why would you detach (Shotcut) or ungroup (Kdenlive) a clip’s audio? Give one example from a trailer edit.
Check your answer
Answer: To edit picture and sound separately. Example: delete the loud game sound under a music section while keeping the picture, or slide a voice line to a different moment.In Kdenlive a clip with sound is dropped as grouped video and audio parts; ungroup to unlink and group again to relink.
Review
Keep earlier skills sharp.
- Review (Semester A storyboarding): how does a storyboard’s shot list help you build the beat map for the trailer edit?
Check your answer
Answer: It already lists the shots in order with shot types and durations, so you can place each shot against the music’s beats and check the total length before editing.Six panels planned a 20-30 second cut-scene; a trailer plan works the same way at 60-90 seconds.
Trailer Edit Kit: Beat Map, Shotcut and Kdenlive Command Card, Chroma Key and Split-Screen Checklists
SLS original technique sheet; Shotcut commands from its feature list, FAQ, keyboard shortcut reference and the Shotcut User Guide (November 2026); Kdenlive equivalents from the Kdenlive 26.08 Manual (CC BY-SA 4.0); microtrailer facts from Valve’s Steamworks Documentation (all retrieved 2026-11-10); the 75-second beat map is an invented example · SLS original
Why this reading. Lesson 5.2 asks you to cut a 60-90 second trailer on your own. This sheet gives a beat-map template with a worked example, a command card for Shotcut and Kdenlive side by side, and checklists for the chroma key and the split screen.
1. Beat map (worked example for a 75-second trailer)
| Time (s) | Section | Shots | Edit and effect | Sound |
|---|---|---|---|---|
| 0-1 | Open | Fade from black into shot 1 | Fade-in on the timeline | Music starts |
| 1-10 | Hook | Shots 1-2, cut every 2 beats | Hard cuts on markers; caption “Dodge. Climb. Escape.” | Hit effect on each dodge |
| 10-35 | Core loop | Shot 3, devlog shot 4 in split screen | Split screen; one 0.5-speed moment with audio muted | Music ducks under one voice line |
| 35-65 | Escalation | Shot 5, faster cutting | Cut every beat; one dissolve to show a later level | Effects louder, music builds |
| 65-75 | Title and end card | Logo over last frame; end card | Keyframed logo zoom; Text: Simple credit line | Final hit, music out |
Steam builds a 6-second microtrailer from six 1-second clips of a game’s first trailer and notes viewers may give a trailer under 10 seconds, so the hook must work on its own and without sound.
2. Command card
| Task | Shotcut | Kdenlive |
|---|---|---|
| Project settings | New Project screen: Video Mode (resolution, aspect ratio, frame rate); later Settings > Video Mode | Project settings when creating the project |
| Add to timeline | Append A, Insert V, Overwrite B | Drag from the Project Bin |
| Trim and split | Drag clip edges or I / O; Split S; Ripple Delete X; Lift Z | Drag clip edges; Razor tool |
| Speed | Properties > Speed (presets 0.5 and 2.0; Pitch Compensation) | Select the clip, hold Ctrl and drag on it, or right-click > Change Speed |
| Transparency | Opacity filter; fade controls on the timeline | Transparency effect (Alpha, Mask and Keying category) |
| Link / unlink | Detach audio from a video clip | Clips with sound split onto video and audio tracks and grouped; ungroup to unlink, group to relink |
| Transitions | Overlap two clips on one track; Properties: Dissolve, wipes, Cut, audio Cross-fade | Mixes (same-track transitions) or composite transitions between tracks |
| Keyframes | Simple keyframes (start animates in, end animates out) or the Keyframes panel; shortcuts { and } set the first and second simple keyframes | Keyframes in the effect’s panel |
| Text | Text: Simple or Text: Rich filter; Open Other > Text makes a transparent text clip | Titles and Graphics |
| Markers | M adds a marker; snapping on | Timeline markers and guides |
| Sync tools | Align To Reference Track; Automatic Audio Ducking (version 26.9) | Audio mixer; align by eye and waveform |
| Low-spec | Settings > Proxy > Use Proxy; Preview Scaling 360p | Proxy clips |
3. Chroma key checklist
- Hang a smooth green or blue sheet or poster board with tape or clips from a height you can reach from the floor; pull out wrinkles.
- Light the sheet evenly from both sides if you can, and stand or place your hands a little in front of it so you cast no shadow on it.
- Do not wear or hold anything in the key color.
- Shotcut: keyed clip on V2, background gameplay on V1. Add Chroma Key: Simple to the keyed clip, pick the Key color with the dropper, then raise Distance slowly until the sheet disappears while your edges stay. Clean colored fringes with a Key Spill filter. (Shotcut also has Chroma Key: Advanced.)
- Kdenlive: the Alpha, Mask and Keying category includes Chroma Key: Basic and Chroma Key: Advanced, and Key Spill Mop Up.
4. Split-screen checklist
- Put one clip on V1 and the other on V2, starting together.
- Shotcut: on V2, add Mask: Simple Shape with a rectangle over half the frame (the user guide’s “sandwich” order: the mask first, then the filters it limits, then Mask: Apply), or shrink each clip with Size, Position & Rotate.
- Line up the two halves so a viewer sees the cause (your hands) and the effect (the gameplay) at the same moment.
5. Draft review
Export a draft with the Default preset. Watch it twice with sound and once muted. Write three fixes in the edit log, make them, and save.
Sources: Shotcut: Full List of Features (Meltytech) (shotcut.org); Shotcut: Frequently Asked Questions (shotcut.org); Shotcut: Keyboard Shortcut Reference (shotcut.org); Shotcut User Guide (PDF, November 2026) (shotcut.org); Kdenlive 26.08 Manual: Timeline (CC BY-SA 4.0) (docs.kdenlive.org); Kdenlive 26.08 Manual: Grouping and Editing (CC BY-SA 4.0) (docs.kdenlive.org); Kdenlive 26.08 Manual: Transitions (CC BY-SA 4.0) (docs.kdenlive.org); Kdenlive 26.08 Manual: Alpha, Mask and Keying (CC BY-SA 4.0) (docs.kdenlive.org); Steamworks Documentation: Trailers (Valve) (partner.steamgames.com)