
prove the product, quotient and power laws of logarithms from the laws of exponents, and use them to simplify and estimate logarithmic expressions.
Instruction
Because a logarithm is an exponent, every law of exponents has a matching law of logarithms. Proving them is the work of this lab, and the proofs all use the same move: name the logarithms, rewrite them as powers, use an exponent law, and translate back.
The product law. Claim: logb(MN) = logb M + logb N for positive M and N.
Proof. Let m = logb M and n = logb N. By the definition of a logarithm, bm = M and bn = N. Multiply: MN = bmbn = bm + n by the product law of exponents. By the definition again, this says logb(MN) = m + n = logb M + logb N. ∎
The quotient law. logb(M/N) = logb M − logb N. With the same names, M/N = bm/bn = bm − n, so logb(M/N) = m − n.
The power law. logb(Mk) = k logb M for any real k. Since M = bm, Mk = (bm)k = bkm, so logb(Mk) = km.
Each proof needs M and N positive, because logarithms of zero or negative numbers are undefined. A complete proof says so.
Using the laws to estimate (A2.SSE.A.3). Suppose you know only that log 2 ≈ 0.3010 and log 3 ≈ 0.4771. Then:
- log 6 = log 2 + log 3 ≈ 0.7782.
- log 8 = log 23 = 3 log 2 ≈ 0.9031.
- log 5 = log(10/2) = 1 − log 2 ≈ 0.6990.
- log 1.5 = log 3 − log 2 ≈ 0.1761.
- log 2,000,000 = log 2 + log 106 ≈ 6.3010. The integer part counts the digits after the first; the decimal part comes from the leading 2.
Before calculators, tables of logarithms turned hard multiplications into additions this way, and the slide rule was a physical version of the product law.
What the laws do not say (MP.3). The most common errors come from inventing laws that look plausible:
- log(M + N) is not log M + log N. Counterexample: log(10 + 10) = log 20 ≈ 1.301, but log 10 + log 10 = 2.
- (log M)/(log N) is not log(M/N). The left side is a change-of-base quotient, logN M.
- (log M)k is not k log M. The power must be on M, inside the logarithm.
In the lab, each pair proves one law aloud, and another pair must either accept each step with its reason or challenge it. Then each pair receives a flawed simplification and must find the false law, give a numerical counterexample and correct the work. A counterexample is the strongest possible critique: one case where the claim fails is enough to disprove it.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Given log 2 ≈ 0.3010 and log 3 ≈ 0.4771, what is log 12?
log(M + N) = log M + log N for all positive M and N.
logb(MN)
Tap to reveallogb M + logb N
logb(M/N)
Tap to reveallogb M − logb N
logb(Mk)
Tap to revealk logb M
logb b
Tap to reveal1
logb 1
Tap to reveal0
Write a complete proof of the quotient law, stating the definition or exponent law used at each step and the condition on M and N. Then find the error in this work and correct it: log(x2 + 4x) = 2 log x + log 4x.
How confident are you that you can prove the laws of logarithms and use them to simplify and estimate?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- Write as a single logarithm: 2 log x + log y − 4 log z
Check your answer
Answer: log(x2y / z4) - Write as a single logarithm: 3 log x + log y − 3 log z
Check your answer
Answer: log(x3y / z3) - Expand: log(x5y / z4)
Check your answer
Answer: 5 log x + log y − 4 log zProduct → sum, quotient → difference, power → coefficient. - Expand: log(x5y / z2)
Check your answer
Answer: 5 log x + log y − 2 log zProduct → sum, quotient → difference, power → coefficient. - Expand: log(x4y / z4)
Check your answer
Answer: 4 log x + log y − 4 log zProduct → sum, quotient → difference, power → coefficient. - Expand: log(x3y / z4)
Check your answer
Answer: 3 log x + log y − 4 log zProduct → sum, quotient → difference, power → coefficient. - Expand: log(x4y / z3)
Check your answer
Answer: 4 log x + log y − 3 log zProduct → sum, quotient → difference, power → coefficient. - Expand: log(x2y / z4)
Check your answer
Answer: 2 log x + log y − 4 log zProduct → sum, quotient → difference, power → coefficient. - Given log 2 ≈ 0.3010 and log 3 ≈ 0.4771, find log 18, log 0.75 and log 45.
Check your answer
Answer: 1.2552; −0.1249; 1.653218 = 2 · 32; 0.75 = 3/22; 45 = 32 · 10/2.
Application
Use the skill in context. Show your reasoning.
- Doubling the intensity of a sound adds how many decibels? (Level = 10 log(I/I0).)
Check your answer
Answer: 10 log 2 ≈ 3.01 dB10 log(2I/I0) = 10 log 2 + 10 log(I/I0). - A solution is 1,000 times as acidic ([H+] 1,000 times as large) as another. How do their pH values compare? Use a log law.
Check your answer
Answer: Its pH is 3 lower−log(1,000h) = −3 − log h. - Before calculators, 347 × 29 was computed as 10log 347 + log 29. Carry this out with logs to four places and compare with the exact product.
Check your answer
Answer: log 347 + log 29 ≈ 4.0027; 104.0027 ≈ 10062; exact 10,063
Challenge
Stretch problems. Expect to think before you write.
- Solve log x + log(x − 3) = 1.
Check your answer
Answer: x = 5 (x = −2 is extraneous)log(x(x − 3)) = 1, so x2 − 3x − 10 = 0; −2 makes log x undefined.
Review
Keep earlier skills sharp.
- Simplify: i36
Check your answer
Answer: 1The powers of i repeat every 4. - Divide −2x3 + 3x2 + 2 by x + 4. State the quotient and remainder, and use the remainder to evaluate p(−4).
Check your answer
Answer: quotient −2x2 + 11x − 44, remainder 178; p(−4) = 178Remainder Theorem: the remainder on division by x − a is p(a).
“Only a 5.8”: New Madrid Earthquakes and the Scale That Hides the Difference
USGS Earthquake Catalog (ComCat), FDSN event and count queries for the New Madrid region, 35–39°N and 92–87°W, and USGS event pages for the 1812 New Madrid and 1895 Charleston, Missouri earthquakes, retrieved November 5, 2026 · Public domain (works of the United States government)
Why this reading. Your lab has to argue about something. Here is the claim, and it is one people genuinely make: “The 1895 Charleston, Missouri earthquake was a 5.8, and it damaged almost every building in Charleston’s business district. The big New Madrid earthquake of February 1812 was a 7.5. That is less than two points apart, so 1812 was only somewhat worse. The magnitude scale flattens everything and is not much use.” Decide whether that is right. You cannot do it without the laws of logarithms, and you cannot do it without the catalog. Both are below. Every magnitude and date comes from the USGS Earthquake Catalog, queried on November 5, 2026.
Table 1. The largest earthquakes in the New Madrid region, 1800–2026
The region is the catalog box 35–39°N, 92–87°W: southeast Missouri and the neighboring parts of Arkansas, Tennessee, Kentucky, Illinois and Indiana. Magnitudes are moment magnitude (Mw) unless noted (Mfa is a magnitude estimated from the area over which a quake was felt; Md is a duration magnitude). The event id is the catalog key, so any row can be looked up.
| Magnitude | Date | Event | USGS event id |
|---|---|---|---|
| 7.5 | 1812-02-07 | Western Tennessee (New Madrid Seismic Zone) | official18120207094500000 |
| 7.5 | 1811-12-16 | Northeastern Arkansas (New Madrid Seismic Zone) | official18111216081500000 |
| 7.3 | 1812-01-23 | North of New Madrid, Missouri | official18120123150000000 |
| 7.0 | 1811-12-16 | Western Tennessee (later the same day) | official18111216131500000 |
| 6.3 | 1811-12-16 | Near New Madrid, Missouri | official18111216090000000 |
| 6.3 | 1811-12-16 | Near New Madrid, Missouri | official18111216180000000 |
| 6.3 | 1843-01-05 | Near Marked Tree, Arkansas (Mfa) | ushis54 |
| 6.1 | 1811-12-17 | Near Memphis, Tennessee | official18111217180000000 |
| 5.8 | 1895-10-31 | Near Charleston, Missouri | official18951031110800000 |
| 5.26 | 1968-11-09 | Near Norris City, Illinois | iscgem814965 |
| 5.2 | 2008-04-18 | Near Bellmont (Mount Carmel area), Illinois | nm606657 |
| 5.2 | 1987-06-10 | Near Claremont, Illinois (Md) | nm603116 |
| 5.1 | 1917-04-09 | Southwestern Illinois (Mfa) | ushis610 |
| 4.8 | 1990-09-26 | Near Chaffee, Missouri | nm603773 |
No seismometers existed in 1811. The magnitudes for the 1811–1812 sequence are estimates rebuilt from written accounts of the shaking, and the catalog says so: for the February 7, 1812 earthquake, five studies published between 1996 and 2011 assigned Mw values from 7.2 to 8.0, and the 2014 National Seismic Hazard Map adopted 7.5 as the best average. Keep that range in mind; you will use it below.
What magnitude actually is
Magnitude is a logarithm. Two relations do all the work, and both are ratios turned into differences by the product law:
- Ground shaking. The amplitude recorded on a seismometer satisfies log A1 − log A2 = M1 − M2, so A1/A2 = 10M1 − M2. The USGS describes this as a tenfold increase in measured amplitude for each whole-number step.
- Energy released. The classic Gutenberg–Richter energy relation is log10E = 1.5M + 4.8, with E in joules, so E1/E2 = 101.5(M1 − M2). One whole step is 101.5 ≈ 31.6, which is the “about 32 times more energy” the USGS quotes for each step.
Now run the claim. 1812 minus Charleston is 7.5 − 5.8 = 1.7. Shaking amplitude: 101.7 = 50.1 times as large. Energy: 101.5 × 1.7 = 102.55 = 355 times as much. Taking logs of both energies gives 1.5(7.5) + 4.8 = 16.05 and 1.5(5.8) + 4.8 = 13.50, and the difference of the logs, 2.55, is the log of the ratio. That is the power law and the quotient law, used on a scale you did not choose.
| Pair | ΔM | Amplitude ratio 10ΔM | Energy ratio 101.5ΔM |
|---|---|---|---|
| Dec. 1811 7.5 vs Jan. 1812 7.3 | 0.2 | 1.6 | 2.0 |
| Mount Carmel area 2008 5.2 vs Chaffee 1990 4.8 | 0.4 | 2.5 | 4.0 |
| Charleston 1895 5.8 vs Mount Carmel area 2008 5.2 | 0.6 | 4.0 | 7.9 |
| Feb. 1812 7.5 vs Charleston 1895 5.8 | 1.7 | 50.1 | 354.8 |
| Any one whole magnitude step | 1.0 | 10 | 31.6 |
The uncertainty in the 1812 magnitude is itself a logarithm problem. The studies range from 7.2 to 8.0, a difference of 0.8, so the highest estimate claims 101.5 × 0.8 = 101.2 ≈ 15.8 times the energy of the lowest. Scientists who disagree by “less than one point” disagree by a factor of about 16.
Table 2. How many, at each size, 1990–2025
Counts of cataloged events in the same box, from January 1, 1990 to January 1, 2026. The region is far quieter than a plate boundary, so the table starts at magnitude 2.
| Magnitude at least | Number of events N | log10N | Ratio to the next row |
|---|---|---|---|
| 2.0 | 2,253 | 3.353 | 16.6 |
| 3.0 | 136 | 2.134 | 10.5 |
| 4.0 | 13 | 1.114 | 13.0 |
| 5.0 | 1 | 0.000 | — |
Plot log10N against magnitude and the points fall close to a line. Fitting the three rows from M2 to M4 gives log10N = 5.56 − 1.12M: the slope is about −1.1, which says each extra magnitude point divides the count by roughly 101.12 ≈ 13. This is the Gutenberg–Richter relation, and it is an exponential law written in logarithmic clothing: N = 105.56 × 10−1.12M. The fit predicts about 0.9 events of M5 or larger, and the catalog has exactly one (the 2008 Mount Carmel-area quake in Illinois) — reassuring, but a single event is too few to test a line with, which is the honest reason to fit only where you have enough events.
Argue the claim
Three things are true at once, and your argument has to hold all three.
- The February 1812 earthquake released about 355 times the energy of the Charleston earthquake, with about 50 times the shaking amplitude at the same distance. “Less than two points apart” is arithmetic reasoning applied to a logarithm, and it is wrong.
- Charleston nonetheless did serious damage. The USGS account reports cracked walls and fallen chimneys across the Charleston business district and at Cairo, Illinois, sand blows and other signs of liquefaction in the river-valley ground between Bertrand, Missouri and Cairo, and shaking felt in 23 states. Damage depends on depth, on what the ground beneath the buildings is made of, on how the buildings were built, and on how many people live nearby — none of which magnitude measures.
- So the scale is not misleading; it answers one question, about the source, and answers it well. The complaint should be aimed at the sentence “a 5.8 is nearly a 7.5,” not at the scale.
The best counterargument to your own position is worth writing down: a scale on which 5.8 and 7.5 look close, when they differ in energy by a factor of about 355, is a scale that invites the mistake. That is a fair criticism of how magnitudes are reported to the public, and it is a different criticism from saying the mathematics is wrong. Separate those two, and you have a real argument.
Sources: USGS Earthquake Catalog search (earthquake.usgs.gov); USGS FDSN event web service (query: 35–39°N, 92–87°W, M4.5+, 1700–2026) (earthquake.usgs.gov); USGS FDSN count service (1990–2025 counts by minimum magnitude) (earthquake.usgs.gov); USGS event page, M 7.5 New Madrid Seismic Zone, February 7, 1812 (earthquake.usgs.gov); USGS event page, M 5.8 near Charleston, Missouri, October 31, 1895 (earthquake.usgs.gov); USGS, Earthquake magnitude, energy release, and shaking intensity (usgs.gov)