
model the Gateway Arch as a transformed parabola, convert between forms by completing the square, build an error function by combining the model with the published catenary, and state a tolerance.
Instruction
The Gateway Arch in St. Louis is 630 feet tall, and the outer faces of its two legs stand 630 feet apart at ground level, according to the National Park Service. Each leg is an equilateral triangle in cross-section, 54 feet on a side at the ground and 17 feet at the top, so the arch is far heavier near its feet than at its crown.
Why a parabola, and why not quite. A chain hanging under its own weight forms a curve called a catenary. Turn that curve upside down and you have the ideal shape for an arch that carries only its own weight. The Gateway Arch was designed as a weighted catenary, a catenary adjusted for legs that thin toward the top, and the Park Service publishes its equation. That equation uses the hyperbolic cosine, which this course does not study. The parabola is the curve this unit gives you: a transformed y = x2 that matches the apex and both feet exactly. Your report finds out how far off it is everywhere in between.
Setting up. Place the origin on the ground directly below the apex, with x in feet. The feet are at (−315, 0) and (315, 0) and the apex is at (0, 630). The model is the parent function y = x2 reflected across the x-axis, compressed vertically and translated up 630:
P(x) = ax2 + 630, with P(315) = 0.
So a · 3152 = −630 and a = −630/99,225 = −2/315 ≈ −0.006349. The negative sign is the reflection; the size, 2/315, is the vertical compression. At the quarter point, x = 157.5, P = 630 − 630/4 = 472.5 feet. Note the structure: halving the distance from the center quarters the drop from the apex, a property of every parabola.
Moving the origin. Measuring from the outside of the south leg means replacing x with x − 315, which translates the model right: P2(x) = −(2/315)(x − 315)2 + 630. Expanded, this is P2(x) = −(2/315)x2 + 4x; the constant term vanishes because the new origin is a point on the curve. Your report must go both ways: expand to general form, then complete the square to recover the vertex, showing that the forms agree (enrichment).
Combining functions (A2.BF.A.1). The Park Service equation describes the arch’s centroid, the curve through the center of each triangular cross-section, which peaks at 625.09 feet and meets the ground 299.22 feet from the center. Fit the same kind of parabola to those numbers and call it Pc(x); call the Park Service curve H(x). Then the model’s error at each position is E(x) = H(x) − Pc(x). The reading tabulates both: at x = 150 ft, H = 531.36 ft and Pc = 468.01 ft, so the error is 63.35 ft. Part of your task is to decide what that number says about the model.
Tolerance (A2.REI.A.1). Suppose a height you measure must agree with the model within 6 inches to count as a match. Write that as an absolute value inequality for the point at x = 157.5 and graph its solution set.
Measuring (optional). You can also test the model against the real outline: measure the arch’s height at three positions from a public-domain National Park Service photograph taken square-on, using the 630-foot width between the feet as the scale, and report your measurement uncertainty.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Moving the origin from below the apex to the outside of the south leg changes P(x) = ax2 + 630 to…
In the model, the arch drops 630 ft from the apex to the feet at x = 315. How much does it drop from the apex to the quarter point, x = 157.5?
Stage 1: name the three points that fix your parabola and explain why three are enough. Using the model, write the tolerance inequality for a height h measured at x = 157.5 ft if it must agree with the model within 6 inches (convert units carefully), and solve it.
How confident are you that you can model a real structure with a transformed function and move between its forms?
Unit 2 checkpoint
Do this before you start the task. It covers the whole unit and tells you what to review first.
Compared with y = x2, y = (x − 3)2 + 1 is…
f(2x) stretches the graph of f to twice its width.
Which is odd?
The vertex of y = 2|x − 1| − 3 is (, ).
Solution of |3x + 1| > 8?
|x + 2| = −3 has two solutions.
|x − 68| ≤ 4 means ≤ x ≤ .
Center and radius of x2 + y2 − 6x + 4y − 12 = 0?
y = 2x2 − 12x + 13 in vertex form is y = 2(x − 3)2 .
The focus of (x − 2)2 = 8(y − 2) is…
The arch model’s error E(x) = H(x) − P(x) combines two functions by subtraction.
Submit: Gateway Arch Modeling Report (4-6 pages) + 5-minute presentation
Task: Using the National Park Service’s published height (630 ft) and width between the outer faces of the legs (630 ft), model the Gateway Arch as a transformed parabola. Describe each transformation from y = x2. Write the model with the origin below the apex and at the outside of the south leg; expand one to general form and complete the square to recover vertex form. Fit the same model to the Park Service’s centroid figures, build the error function E(x) = H(x) − Pc(x), tabulate it at five positions, and write and graph a tolerance inequality for one measured height. Compare your model with the Park Service’s weighted-catenary equation in a table and on one graph (Desmos or GeoGebra), and, if you choose, with three heights measured from a scaled photograph; explain where the parabola fails and why.
Submission workflow
- Stage 1 — Plan. A labeled sketch with the coordinate system, the published dimensions you will use, the parent function and the transformations you expect, and your plan for the comparison (the reading’s catenary table, plus your photograph and scale calculation if you take that route).
- Stage 2 — Peer-reviewed draft. A partner checks your completing-the-square work and one value of E(x); submit a revision note.
- Stage 3 — Final report. 4-6 pages with both forms, the transformations, the error function and table, the tolerance inequality, the comparison with the catenary and a limitations section on where the model fails.
- Stage 4 — Five-minute presentation. Present the model and one design insight; answer two questions. A recorded presentation is an equal-credit alternative.
How it is scored
| Criterion | What proficient looks like |
|---|---|
| Transformations (A2.BF.A.3) | Each transformation from the parent function is identified, justified and matched to the parameters. |
| Forms and completing the square (enrichment) | General and vertex forms are derived and shown to agree. |
| Combining functions (A2.BF.A.1) | The error function is built correctly and used. |
| Comparing representations (A2.IF.A.1) | The parabola is compared with the published catenary in a table and a graph, and with any measured points. |
| Tolerance (A2.REI.A.1) | The absolute value inequality is correct, solved and graphed. |
| Modeling judgment (MP.4, MP.5) | The centroid-versus-outer-edge distinction, the weighted catenary and any measurement uncertainty are addressed honestly. |
The Gateway Arch: Published Dimensions and the Curve It Was Built To
National Park Service, Gateway Arch Fact Sheet (nps.gov/jeff), retrieved Nov. 5, 2026; National Park Service, Jefferson National Expansion Memorial, “Mathematical Equation” page (Internet Archive capture of April 13, 2011), retrieved Nov. 5, 2026; Tables 3 and 4 computed by SLS from the published figures · Public domain (works of the United States government), with SLS original worked arithmetic
Why this reading. The task asks you to model the Gateway Arch with a parabola. The arch is not a parabola, and the National Park Service says exactly what it is: it publishes the arch’s dimensions and the equation its designers used. So this reading gives you both, and puts your model side by side with the real curve. Everything in Tables 1 and 2 is published by the Park Service; Tables 3 and 4 are computed here from those published figures.
Table 1. Published dimensions
| Dimension | Published figure |
|---|---|
| Maximum height | 630 ft (192 m) |
| Outer width, outside of the north leg to outside of the south leg | 630 ft (192 m) |
| Shape of a cross-section of a leg | Equilateral triangle |
| Cross-section dimension at the base | 54 ft (16.46 m) |
| Cross-section dimension at the top | 17 ft (5.18 m) |
Your model from Table 1
Put the origin on the ground directly below the apex, x in feet along the ground. The outer edge of the arch passes through the feet (−315, 0) and (315, 0) and the apex (0, 630). A parabola with its vertex at the apex is P(x) = ax2 + 630, and P(315) = 0 gives a(99,225) = −630, so
P(x) = −(2/315)x2 + 630 ≈ −0.006349x2 + 630.
- The transformations. Start from y = x2; reflect across the x-axis (the minus sign); compress vertically by the factor 2/315 (because 2/315 < 1); translate up 630.
- The structural property. At the quarter point x = 157.5, P = 630 − 630/4 = 472.5 ft. Halving the distance from the center quarters the drop from the apex, and that is true of every parabola.
- Moving the origin. Measured from the outside of the south leg, replace x by x − 315: P2(x) = −(2/315)(x − 315)2 + 630. Expanded, the constant terms cancel and P2(x) = −(2/315)x2 + 4x, because the new origin is a point on the curve. Completing the square on −(2/315)(x2 − 630x) adds back (2/315)(3152) = 630 and recovers the vertex (315, 630).
Table 2. The Park Service equation
The Park Service publishes the equation behind the arch’s construction. It describes the arch’s centroid — the curve through the center of each triangular cross-section — not its outer edge. With Y measured down from the top of the centroid and X across from the center line:
Y = A(cosh(CX/L) − 1), where A = fc/(Qb/Qt − 1) and C = cosh−1(Qb/Qt).
| Symbol | Meaning | Published value |
|---|---|---|
| fc | Maximum height of the centroid | 625.0925 ft |
| Qb | Maximum cross-sectional area, at the arch base | 1,262.6651 sq ft |
| Qt | Minimum cross-sectional area, at the arch top | 125.1406 sq ft |
| L | Half the width of the centroid at the arch base | 299.2239 ft |
| A | Computed from fc, Qb, Qt | 68.7672 |
| C | Computed from Qb, Qt | 3.0022 |
Turned into a height above the ground, the centroid is H(x) = fc − A(cosh(Cx/L) − 1) = 693.8597 − 68.7672 cosh(0.0100333x). The function cosh, the hyperbolic cosine, is on most graphing calculators and in Desmos as cosh; you do not need its theory, only its values. The ratio Qb/Qt ≈ 10.09 is why the arch is a weighted catenary: a leg’s cross-section at the ground is about ten times its cross-section at the top, so the base carries far more weight per foot than the crown.
A check you can do. The outer height is 630 ft and the centroid height is 625.0925 ft, a gap of 4.9075 ft. The centroid of an equilateral triangle sits one third of the way up from a side, and one third of the height of a 17-ft equilateral triangle is 17√3/6 ≈ 4.9075 ft. The two published sources agree to four decimal places.
Table 3. Parabola and catenary, side by side
To compare like with like, fit the same model to the centroid: through (±299.2239, 0) and (0, 625.0925), Pc(x) = −(625.0925/299.22392)x2 + 625.0925 ≈ −0.0069815x2 + 625.09. The error function is E(x) = H(x) − Pc(x). Heights in feet; both curves are symmetric, so negative x gives the same values.
| x (ft from center) | Catenary H(x) | Parabola Pc(x) | Error E(x) |
|---|---|---|---|
| 0 | 625.09 | 625.09 | 0.00 |
| 50 | 616.26 | 607.64 | 8.62 |
| 100 | 587.48 | 555.28 | 32.20 |
| 150 | 531.36 | 468.01 | 63.35 |
| 200 | 433.48 | 345.83 | 87.65 |
| 250 | 268.68 | 188.75 | 79.93 |
| 280 | 121.07 | 77.74 | 43.33 |
| 299.22 | 0.00 | 0.00 | 0.00 |
The two curves agree at the apex and the feet, because that is where the parabola was forced through. Everywhere in between the catenary is higher. The gap grows to 87.65 ft at x = 200; a finer search puts the largest gap at about 90.3 ft near x = 218.5 ft, which is 14 percent of the arch’s height. Write the condition “the model is within 10 ft of the arch” as |E(x)| ≤ 10, and it holds only for |x| ≤ about 54 ft near the top and |x| ≥ about 295.5 ft right at the feet. Between those, the parabola is not a usable description of the arch.
Table 4. The same comparison as widths
Solve each model for x at a given height and double it to get the arch’s width (centroid to centroid) at that height.
| Height (ft) | Width, catenary (ft) | Width, parabola (ft) | Catenary wider by (ft) |
|---|---|---|---|
| 100 | 567.25 | 548.49 | 18.76 |
| 200 | 530.19 | 493.51 | 36.68 |
| 300 | 484.53 | 431.58 | 52.95 |
| 400 | 424.89 | 359.12 | 65.77 |
| 500 | 338.17 | 267.71 | 70.46 |
| 600 | 165.49 | 119.90 | 45.59 |
At 500 ft up, the real arch is about 70 ft wider than the parabola says. The parabola tapers too early: its sides lean in steadily all the way up, while the weighted catenary keeps its legs nearly upright for longer and then turns more sharply near the top. If you lay a parabola over a square-on photograph of the arch, this is the mismatch you will see.
Why the parabola fails
A chain hanging under its own weight is a catenary; turned upside down, the same curve is the ideal shape for an arch that carries only its own weight. A cable carrying a load spread evenly along the horizontal, like a bridge deck, is a parabola. The arch carries no deck — nearly all of its load is its own weight, concentrated low in the heavy legs — so nothing pulls its shape toward a parabola. The parabola is still the right first model for this unit, because it is a transformed parent function you can build from three published numbers. The report’s job is to say, with Table 3 in hand, how far that first model can be trusted.
Tolerance. If a height you measure from a photograph at x = 157.5 must agree with your model within 6 inches to count as a match, then |h − 472.5| ≤ 0.5 ft, that is, 472 ft ≤ h ≤ 473 ft. Convert before you compare: 6 in = 0.5 ft, and a report that writes |h − 472.5| ≤ 6 has specified a tolerance twelve times too loose.
Measuring from a photograph (optional). Any public-domain National Park Service photograph taken square-on to the arch will do. Use the 630-ft outer width between the feet as the scale, measure the outer height at three positions, and compare with P(x), not Pc(x): a photograph shows the outer edge, not the centroid. Report how many feet one millimeter on your print represents, because that is your measurement uncertainty.
Sources: National Park Service, Gateway Arch Fact Sheet (nps.gov); National Park Service, Mathematical Equation (Jefferson National Expansion Memorial; archived 2011 capture) (web.archive.org); Wikipedia, Gateway Arch (quotes the same constants) (en.wikipedia.org)