
evaluate logarithms from the definition, translate between logarithms in different bases, and estimate logarithmic values without a calculator.
Instruction
The question a logarithm answers. 2 to what power is 32? The answer, 5, is called the logarithm of 32 base 2, written log2 32 = 5. In general,
logb x = y means exactly by = x,
for b > 0, b ≠ 1 and x > 0. A logarithm is an exponent. Every question about a logarithm can be turned back into a question about a power.
Evaluating from the definition.
- log3 81 = 4, because 34 = 81.
- log 0.001 = −3. (A logarithm written without a base is base 10, the common logarithm.) 10−3 = 0.001.
- log5 1 = 0, because any allowed base to the 0 power is 1.
- log4 8 = 3/2, because 43/2 = (√4)3 = 8.
- log2(−4) is undefined: no power of 2 is negative.
Estimating (A2.SSE.A.3). log 500 lies between log 100 = 2 and log 1,000 = 3, because 500 lies between 102 and 103. It is closer to 3 than the halfway point suggests: 102.5 ≈ 316, and 500 is above that, so log 500 > 2.5. A calculator gives 2.699. Estimating first is how you catch a mistyped entry. Similarly log2 10 is between 3 and 4, since 23 = 8 and 24 = 16.
Change of base (A2.SSE.A.3). Most calculators have only log (base 10) and ln (base e, the natural logarithm, which you will meet in Lesson 1.4). To evaluate log2 10, translate it into base 10 using only the definition. Let y = log2 10, so 2y = 10. Now write the base itself as a power of 10: 2 = 10log 2. Substituting, (10log 2)y = 10, so 10y · log 2 = 101. Equal powers of 10 have equal exponents, so y log 2 = 1, and y = 1/log 2 ≈ 3.3219. The same argument for any base gives
logb x = log x / log b.
Examples: log7 50 = log 50/log 7 ≈ 1.6990/0.8451 ≈ 2.0104. Check: 72 = 49, so an answer just above 2 is right. And log2 10 ≈ 3.3219 agrees with the estimate between 3 and 4. The formula works equally well with ln in place of log, as long as you use the same one on top and bottom.
Precision (MP.6). Write the base whenever it is not 10. Round only at the end: rounding log 7 to 0.85 before dividing gives 1.6990/0.85 ≈ 1.9988, which wrongly suggests 7y = 50 needs an exponent below 2. Finally, check every value by converting back to a power: if log7 50 ≈ 2.0104, then 72.0104 should be about 50.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
log2 32 = , log 0.001 = , and log4 8 = .
Which expression equals log7 50?
Without a calculator, log 500 is closest to…
Derive the change-of-base formula for logb x using only the definition of a logarithm and the laws of exponents, as in the lesson. Then estimate log3 100 between two integers, compute it, and check your answer by converting it back to a power of 3.
How confident are you that you can evaluate, estimate and change the base of logarithms?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- Evaluate: log4 4
Check your answer
Answer: 1Ask: 4 to what power gives 4? - Evaluate: log3 (1/3)
Check your answer
Answer: −1Ask: 3 to what power gives 1/3? - Evaluate: log3 81
Check your answer
Answer: 4Ask: 3 to what power gives 81? - Evaluate: log3 9
Check your answer
Answer: 2Ask: 3 to what power gives 9? - Evaluate: log3 27
Check your answer
Answer: 3Ask: 3 to what power gives 27? - Evaluate: log10 10000
Check your answer
Answer: 4Ask: 10 to what power gives 10000? - Evaluate: log10 1
Check your answer
Answer: 0Ask: 10 to what power gives 1? - Evaluate: log5 1
Check your answer
Answer: 0Ask: 5 to what power gives 1? - Use change of base to evaluate log3 50, log6 200 and log2 0.1 to four decimal places.
Check your answer
Answer: 3.5609; 2.9570; -3.3219logb x = log x/log b. - Between which two integers is log 0.02? Then evaluate it.
Check your answer
Answer: Between −2 and −1; −1.69900.01 < 0.02 < 0.1.
Application
Use the skill in context. Show your reasoning.
- pH = −log[H+]. A sample of Missouri River water (illustrative) has [H+] = 3.2 × 10−8. Find its pH.
Check your answer
Answer: 7.49 - Sound level in decibels is 10 log(I/I0). What is the level of a sound 108 times the reference intensity? How many times as intense is a 90 dB sound?
Check your answer
Answer: 80 dB; 10 times as intense - On the earthquake magnitude scale, each whole step multiplies the measured wave amplitude by 10. The February 7, 1812 New Madrid earthquake is estimated at magnitude 7.5. How many times the amplitude of a magnitude 6.5 quake was it, and of a magnitude 5.5?
Check your answer
Answer: 10 times; 100 times107.5 − 6.5 and 102.
Challenge
Stretch problems. Expect to think before you write.
- Without a calculator, find the two integers log2 1,000 lies between, then use change of base to evaluate it.
Check your answer
Answer: Between 9 and 10; 9.965829 = 512, 210 = 1,024.
Review
Keep earlier skills sharp.
- Evaluate exactly: 25−3/2
Check your answer
Answer: 1/125Take the 2th root of 25 first, then raise to the 3 power; a negative exponent means reciprocal. - Solve: 2x2 − 9x − 8 = 0
Check your answer
Answer: x = (9 ± √145) / 4Use the quadratic formula and simplify the radical. A negative discriminant gives complex solutions.
A Page of Common Logarithms, and How a Table Was Read
SLS original reference table; values are common (base-10) logarithms rounded to four decimal places · SLS original
Why this reading. The lab asks you to evaluate and estimate logarithms without a calculator and then check with one. That is impossible with nothing in front of you but the definition. Every student before about 1975 had this page, or one like it, in the back of the book. The values below were computed for this course and rounded to four decimal places; nothing here is quoted from a copyrighted table.
Table 1. log x for x from 1.0 to 9.9
| x | .0 | .1 | .2 | .3 | .4 | .5 | .6 | .7 | .8 | .9 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0.0000 | 0.0414 | 0.0792 | 0.1139 | 0.1461 | 0.1761 | 0.2041 | 0.2304 | 0.2553 | 0.2788 |
| 2 | 0.3010 | 0.3222 | 0.3424 | 0.3617 | 0.3802 | 0.3979 | 0.4150 | 0.4314 | 0.4472 | 0.4624 |
| 3 | 0.4771 | 0.4914 | 0.5051 | 0.5185 | 0.5315 | 0.5441 | 0.5563 | 0.5682 | 0.5798 | 0.5911 |
| 4 | 0.6021 | 0.6128 | 0.6232 | 0.6335 | 0.6435 | 0.6532 | 0.6628 | 0.6721 | 0.6812 | 0.6902 |
| 5 | 0.6990 | 0.7076 | 0.7160 | 0.7243 | 0.7324 | 0.7404 | 0.7482 | 0.7559 | 0.7634 | 0.7709 |
| 6 | 0.7782 | 0.7853 | 0.7924 | 0.7993 | 0.8062 | 0.8129 | 0.8195 | 0.8261 | 0.8325 | 0.8388 |
| 7 | 0.8451 | 0.8513 | 0.8573 | 0.8633 | 0.8692 | 0.8751 | 0.8808 | 0.8865 | 0.8921 | 0.8976 |
| 8 | 0.9031 | 0.9085 | 0.9138 | 0.9191 | 0.9243 | 0.9294 | 0.9345 | 0.9395 | 0.9445 | 0.9494 |
| 9 | 0.9542 | 0.9590 | 0.9638 | 0.9685 | 0.9731 | 0.9777 | 0.9823 | 0.9868 | 0.9912 | 0.9956 |
Why one decade is enough. Every positive number is a number between 1 and 10 times a power of ten, and log(a × 10n) = log a + n. So log 4,830,000 = log 4.83 + 6. Read 4.8 from the table (0.6812), notice 4.83 is three tenths of the way to 4.9 (0.6902), add about 0.0027, and you have 0.6839; so log 4,830,000 ≈ 6.6839. The whole-number part, 6, was called the characteristic and told you the size; the decimal part, 0.6839, was the mantissa and told you the digits. That split is the product law doing its work, and it is why a single decade serves the whole number line.
Table 2. Change of base, done from this page
Change of base turns any logarithm into a quotient of two entries above.
| Wanted | Bracketed by | Computed as | From this page | Exact to 4 places | Check |
|---|---|---|---|---|---|
| log 500 | 2 and 3 | log 5 + 2 | 2.6990 | 2.6990 | 102.5 ≈ 316, and 500 > 316, so above 2.5 ✓ |
| log750 | 2 and 3 | (0.6990 + 1) ÷ 0.8451 | 2.0104 | 2.0104 | 72 = 49, just under 50 ✓ |
| log210 | 3 and 4 | 1 ÷ 0.3010 | 3.3223 | 3.3219 | 23 = 8, 24 = 16 ✓ |
| log3100 | 4 and 5 | 2 ÷ 0.4771 | 4.1920 | 4.1918 | 34 = 81, 35 = 243 ✓ |
| log48 | 1 and 2 | 0.9031 ÷ 0.6021 | 1.4999 | 1.5000 | 43/2 = 8 exactly ✓ |
| log51000 | 4 and 5 | 3 ÷ 0.6990 | 4.2918 | 4.2920 | 54 = 625, 55 = 3,125 ✓ |
Read the last two columns against each other. Four of the six disagree in the fourth decimal place. That is not a mistake in the table; it is what happens when you divide two numbers that have each already been rounded. log48 is exactly 3/2, and the table gives 1.4999. A four-place table supports four-place inputs and about three reliable places of output, and knowing that is part of using one.
Round last, not first. log750 computed as 1.6990/0.8451 gives 2.0104. Round the denominator to 0.85 first and you get 1.9988 — below 2, which would say 7y = 50 needs a smaller exponent than 72 = 49 does. That is not a small error; it is a wrong answer, and the bracketing check in the last column is what catches it. Bracket first, compute second, check last.
The slide rule. A slide rule is this table cut into wood. Two rulers are marked not at 1, 2, 3 but at distances log 1, log 2, log 3 from the end, so the mark for 2 sits 0.3010 of a decade along and the mark for 3 sits 0.4771 along. Sliding one scale so its 1 lines up with the other’s 2, then reading above the 3, adds those two distances: 0.3010 + 0.4771 = 0.7782, which the scale prints as 6. The product law is a physical act. It also explains the instrument’s famous limitation — it gives you 6, never 6 or 60 or 600, because the characteristic was never on the wood.