model equal groups with parentheses and solve p(x + q) = r two ways: divide first, or use the distributive property.
Phase 2: Investigate
Do Now. Cut a paper strip into 3 equal pieces. On each piece write “x + 4.” Tape them end to end. The whole strip stands for 36.
What is x if 3(x + 4) = 36?
The reading opens over the lesson; close it to come back to exactly where you were.
When parentheses appear. Sometimes every one of several equal groups has two parts. Four planter sides might each need a board x inches long plus 1.5 extra inches. The total is 4 groups of (x + 1.5), written 4(x + 1.5). Equations like this have the form p(x + q) = r.
Worked example 1: two ways. Noor solves 3(x + 4) = 36. Way 1, divide first: divide both sides by 3: x + 4 = 12. Subtract 4: x = 8. Way 2, distribute first: 3(x + 4) = 3x + 12, so 3x + 12 = 36. Subtract 12: 3x = 24. Divide by 3: x = 8. Check: 3(8 + 4) = 3 × 12 = 36. Both ways give 8.
The distributive property. 3(x + 4) means 3 groups of x and 3 groups of 4. That is why the 3 multiplies both the x and the 4. A common mistake is writing 3x + 4, which multiplies only the x.
Worked example 2: planter sides. Caleb’s sample planter frame has 4 sides. Each side board is x inches plus 1.5 inches to cover the thickness of a corner post (the actual 1.5-inch side of a 2×4). The crew has 98 inches of board for the sides. Step 1: 4(x + 1.5) = 98. Step 2: divide both sides by 4: x + 1.5 = 24.5. Step 3: subtract 1.5: x = 23. Check: 4(23 + 1.5) = 4 × 24.5 = 98. Each side’s open length is 23 inches.
Which way is easier? Divide first when r ÷ p is easy to find, as 98 ÷ 4 = 24.5 is. Distribute first when dividing would make messy decimals, or when you like working with px + q = r.
Read the meaning. In Caleb’s problem, x + 1.5 = 24.5 is the length of each board, and x = 23 is the open length inside the posts. Say which number answers the question.
Solve each equation one way, then check it the other way.
Draw the equal groups for each word problem.
A sample planter has 4 sides. Each side board is x inches plus 3.5 inches of overlap. The crew uses 110 inches of board. Write and solve an equation. What does x mean?
Three friends each buy a seed packet for x dollars and a $0.75 plant tag. They spend $6.75 in all. What is x?
Explain why 3(x + 4) is not the same as 3x + 4. Use a drawing of equal groups.
Parentheses mean equal groups. Next we let p, q and r be negative numbers and fractions.
Exit ticket: solve 5(x + 1.2) = 21 and check.
Pacing: Do Now strips 6 min, reading 7, mini lesson 12, guided practice 10, exit ticket 5.
Accuracy: inspection facts (no national procedure at the time, calipers, steel tapes, moisture meters, the fairness goal) are from the NIST story (March 2017). The 1.5-inch corner allowance uses NIST’s 1.5-inch actual thickness; the frame, board lengths and prices are sample data.
Likely misconceptions: 4(x + 1.5) = 4x + 1.5 (giving x = 24.125); stopping at x + 2 = 9 and answering 9; subtracting first in p(x + q) = r (45 − 2 = 43, then 8.6).
Supports: paper strips; algebra tiles in groups. Stretch: ½(x + 6) = 10 (x = 14).
Answer guide: 2(x + 3.5) = 17: divide, x + 3.5 = 8.5, x = 5; or 2x + 7 = 17, 2x = 10, x = 5. Planter: 4(x + 3.5) = 110, x + 3.5 = 27.5, x = 24, the length of each side without the overlap. Exit ticket: x + 1.2 = 4.2, x = 3.
National Institute of Standards and Technology, Making Sure that Lumber Measures Up (news, March 2017) · U.S. government work, public domain
This NIST news story explains why checking lumber sizes matters to shoppers. Most people learn that a “two by four” is really about 1.5 inches by 3.5 inches. But the story asks a harder question: how accurate are the boards in stores and lumber yards?
State and local inspectors answer that by measuring boards at stores or earlier in the supply chain. At the time of the story, there were no nationally agreed test procedures for them to follow. Different inspectors might use different tools, measure at the easy-to-reach ends of boards, which can mislead, or choose boards to test in different ways. That made results hard to compare.
NIST’s Office of Weights and Measures, an industry lumber committee and California worked on a step-by-step procedure. It says what calipers to use for thickness and width, which steel tape to use for length, and how to use moisture meters, since wet wood measures differently from dry wood.
A NIST leader said the goal is fairness: shoppers can trust what they buy, and sellers know the marketplace is fair. For builders, it means a plan based on actual sizes will fit.
Source: National Institute of Standards and Technology, Making Sure that Lumber Measures Up (news, March 2017) (nist.gov)