test my two devices and show the results on a picture chart.
Phase 4: Build
Let’s think. How will we know if our device works? What should we watch for?
Which of your two devices will work better across the room?
The reading opens over the lesson; close it to come back to exactly where you were.
Signal makers, it is Test Day! A test shows us what really happens. We do not guess. We watch and we count.
How we test. One partner stands across the room with the yes / no / line-up cards. The sender picks a secret message card. The sender sends it with the device. The partner holds up the card they think it was. Did it match? Color one box on the chart for each right try. We do 5 tries for each device.
Fair test. Test both devices the same way. Same distance. Same partner. Same number of tries.
Worked example 1: Nina’s light box. Nina flashes her light box at the wall by her partner. Her partner gets 5 out of 5 right, across the room. Nina colors 5 boxes. These are sample results.
Worked example 2: Jamal’s box drum. Jamal taps a box with a spoon. He sees the box top shake. That is the vibration! His partner gets 4 out of 5 right. One time, the room got noisy, and his partner missed a tap. Jamal colors 4 boxes. These are sample results.
Our picture chart. The chart shows how each device did. We will read it next time to find patterns.
| Device | Light or sound? | Tries my partner got right (color one box for each) | Reach far? (circle) |
|---|---|---|---|
| Design A | □ □ □ □ □ | 3 steps / 6 steps / across the room | |
| Design B | □ □ □ □ □ | 3 steps / 6 steps / across the room |
Test, then check. Point to your answer.
Finish your chart.
Color your chart for Design A and Design B. Circle how far each one worked.
Point to the device with more colored boxes. Tell a partner.
Your chart is full of evidence! Next time, we will check what you know about light and sound.
Exit ticket: tell one surprise from Test Day.
Pacing (40 min): warm-up 3, reading 6, mini lecture and modeling 8, testing 18, closure 5.
Materials: both devices per team, yes / no / line-up cards, a face-down message deck for senders, one Test Chart per team, crayons, tape marks on the floor at 3 steps, 6 steps and across the room.
Setup: run tests in two waves so the room stays calm enough for sound devices. Light devices need the lights dimmed a little. Cup phones are tested with the string pulled across the room.
Misconceptions: “louder is better” (only as loud as needed; Safe constraint); the device that looks nicer works better (the chart decides).
Supports: an adult helps count tries. Stretch: test a third distance.
Answer guide: charts show 0 to 5 colored boxes for each design and a circled distance. Spoken observations name a vibration (box top shook, string buzzed) or light (bright spot on the wall).
National Park Service, Natural Sounds: Understanding Sound · U.S. government work, public domain
Park scientists listen to the sounds of nature. They know a lot about how sound works.
Sound starts with a vibration. A vibration is a quick back-and-forth shake. When something vibrates, it shakes the air around it. That shake spreads out, like ripples in a pond. Sound can move through air. It can move through water, too.
Some sounds are high, like a bird’s tweet. Some sounds are low, like a big drum. Scientists call high and low pitch.
Some sounds are loud. Some are soft. Scientists can measure how loud a sound is. They use a unit called a decibel.
Today you will test your devices. When you tap or ring, look for the vibration. Then listen. Can your partner hear it from far away? Can your partner count the taps?
Source: National Park Service, Natural Sounds: Understanding Sound (nps.gov)