build my two designs using only the class kit, and show how the shape helps each one work.
Phase 4: Build
Let’s think. Look at our class kit. Can we bring in a phone or a big speaker from home?
What can we use to build our device?
The reading opens over the lesson; close it to come back to exactly where you were.
Signal makers, it is Build Day! Get your Design Page. You will build Design A and Design B. Use only the class kit.
Build like an engineer. Look at your drawing. Get your parts. Build one step at a time. Try it. Fix it. Then build the next part.
Worked example 1: Zoe fixes a floppy flap. Zoe builds her light box. Her cardboard flap keeps falling off. She tapes the top edge of the flap to the box. Now it swings up and down like a little door. The flap shape covers the whole hole, so no light leaks out when it is down.
Worked example 2: Sam’s string slips. Sam’s teacher pokes a small hole in each cup. Sam pushes the string through. But the string pulls right out! Sam ties the string to a paper clip inside the cup. Now it stays. When he pulls the string tight, it can carry the vibrations.
Kit only. If you need a part that is not in the kit, change your design. That is what engineers do with constraints.
Show it. When you finish, point to the shape on your device. Tell how the shape helps.
Stop at each check. Point to your answer.
Show and tell.
Hold up one device. Point to its shape. Tell a partner: “This shape helps because ___.”
Draw a star on your Design Page next to anything you changed while building.
You built two devices! Next time is Test Day.
Exit ticket: tell one problem you had while building, and how you fixed it.
How confident are you that you can I can tell how the shape of my device helps it work.
Pacing (40 min): warm-up 3, reading 6, mini lecture 6, build 20 (with guided checks at the pause points), closure 5.
Materials: class kit per team: paper cups, about 3 meters of string, paper clips, tape, small boxes, cardboard, wax paper, foil, a flashlight, rubber bands, spoons, a small bell. Pre-poke cup holes with a pencil tip before class.
Setup: teams of two. Put kits on trays. Label each device A or B with the team’s name. Keep everything for 1.19.
Misconceptions: a cup phone works with a droopy string (it needs to be tight; we test this in 1.21); more tape is always better.
Supports: pre-cut flaps. Pair a confident builder with a beginner. Stretch: add foil inside the light box and predict what will happen.
Answer guide: shape answers name a part and a job: “The cup catches my voice,” “the flap covers all the light.”
National Park Service, Cape Hatteras National Seashore: An Aid-to-Navigation · U.S. government work, public domain
A lighthouse helps ships stay safe. Long ago, many tall lighthouses along one coast looked almost the same. From a ship far out at sea, it was hard to tell them apart.
So each tower got its own look. This look is called a daymark. It helps sailors know which lighthouse it is in the daytime.
One lighthouse has black and white stripes. The stripes wrap around and around the tower. A tower nearby has a checkerboard pattern. Another is plain white.
Why only black, white and red paint? Those colors stand out best against the sky and land.
At night, sailors look for the light instead. The striped lighthouse flashes every seven and a half seconds.
The look of the tower helps it do its job. Today you will build. Think about how the shape of your device helps it send your message.
Source: National Park Service, Cape Hatteras National Seashore: An Aid-to-Navigation (home.nps.gov)