
build a function from a context, find the inverse of a simple function to answer a question backward, and compare two functions represented in different ways.
Instruction
A function answers “given the input, what is the output?” Its inverse answers the reverse question: “given the output, what was the input?” Many practical questions are inverse questions.
A simple inverse. A taxi (illustrative fare) charges $3.50 plus $2.75 per mile: F(m) = 3.5 + 2.75m. How far can you go for $25.50? Solve F(m) = 25.50: 2.75m = 22, so m = 8 miles. To answer this for any fare, solve F = 3.5 + 2.75m for m:
m = (F − 3.5) ÷ 2.75
This is the inverse function. It undoes the original in reverse order: the fare function multiplies by 2.75 and then adds 3.5, so the inverse subtracts 3.5 and then divides by 2.75. Check: an 8-mile ride costs 3.5 + 22 = $25.50, and the inverse sends $25.50 back to 8 miles.
A tiered rate. Some utilities charge more per unit once usage passes a baseline. Suppose (illustrative rates) electricity costs $0.40 per kilowatt-hour (kWh) for the first 300 kWh in a month and $0.50 per kWh above that. The bill C(k) for k kWh is piecewise:
C(k) = 0.40k for 0 ≤ k ≤ 300
C(k) = 120 + 0.50(k − 300) for k > 300
The 120 is the cost of the first 300 kWh (300 × 0.40), and k − 300 counts only the kWh above the baseline. So C(250) = $100, C(300) = $120 and C(450) = 120 + 0.50(150) = $195. The two pieces meet at (300, 120), so the graph has no jump, just a steeper slope after the baseline.
Inverting the tiered rate. A family’s budget allows a $195 bill. How much electricity is that? Since $195 is more than $120, use the second piece: 195 = 120 + 0.50(k − 300), so k − 300 = 150 and k = 450 kWh. In general, the inverse is k = C ÷ 0.40 for bills up to $120, and k = 300 + (C − 120) ÷ 0.50 for bills above $120. Every output comes from exactly one input, which is why this function has an inverse. The parking-garage step function from Lesson 1.3 does not: a $6 charge could mean 1.5 hours or 2 hours.
Comparing representations. A second plan charges a flat $0.45 per kWh and is shown only as a graph, a line through (0, 0) and (600, 270). Which plan is cheaper at 450 kWh? From the flat plan’s graph, its slope is 270 ÷ 600 = 0.45, so 450 kWh costs $202.50, more than the tiered $195. The two plans cost the same where 0.45k = 120 + 0.50(k − 300), which gives k = 600 kWh, $270 on both. Below 600 kWh the tiered plan is cheaper; above it, the flat plan is. Comparing functions given in different forms means translating them into a common one, here rates and a break-even point.
Workshop. Build the tiered function, its inverse and the comparison for the rate cards provided, then write a short note to a household that uses about 500 kWh a month, explaining which plan to choose and what usage would change your advice.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
What is the inverse of F(m) = 3.5 + 2.75m?
With the illustrative tiered rate, C(450) = $, and a bill of $100 corresponds to kWh.
Simulation & tools
Building a function and its inverse
Set up. Open the Numbers screen. Drag a × 2 card into the first slot of the builder and a + 3 card into the second.
Observe and record. Send the inputs −2, −1, 0 and 1 through the builder and record each output in a table (if your version offers different input cards, choose four small ones whose outputs also appear among the input cards). Write the rule as a function f(x).
Build the inverse. Clear the builder. Using only the cards available, build the machine that undoes f: choose the cards and their order. Send your recorded outputs through it and record what comes out. You should get back −2, −1, 0 and 1. Write the inverse rule and explain why the order of the cards had to be reversed.
No device? Draw the two machines as boxes with arrows and trace the same numbers through by hand.
Open in a new tab ↗ · PhET Interactive Simulations, University of Colorado Boulder · CC BY 4.0
A household uses about 500 kWh a month. Using the tiered function and the flat plan’s graph, compute both bills, state the break-even usage, and write a two-sentence recommendation that says what usage would change it.
How confident are you that you can build a function from a context, find its inverse, and compare it with a function given another way?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- Find the inverse of f(x) = −3x + 4.
Check your answer
Answer: f−1(x) = −(1/3)x + 4/3Swap x and y, then solve for y. - Find the inverse of f(x) = 4x + 5.
Check your answer
Answer: f−1(x) = (1/4)x − 5/4Swap x and y, then solve for y. - Find the inverse of f(x) = −x − 9.
Check your answer
Answer: f−1(x) = −x − 9Swap x and y, then solve for y. - Find the inverse of f(x) = 6x + 7.
Check your answer
Answer: f−1(x) = (1/6)x − 7/6Swap x and y, then solve for y. - Find the inverse of f(x) = −4x − 7.
Check your answer
Answer: f−1(x) = −(1/4)x − 7/4Swap x and y, then solve for y. - Find the inverse of f(x) = −x + 8.
Check your answer
Answer: f−1(x) = −x + 8Swap x and y, then solve for y. - Find the inverse of C = 0.40k.
Check your answer
Answer: k = C/0.40 = 2.5C - Find the inverse of F = 1.8C + 32.
Check your answer
Answer: C = (F − 32)/1.8Undo in reverse order.
Application
Use the skill in context. Show your reasoning.
- A taxi charges F(m) = 3.5 + 2.75m dollars for m miles (illustrative). How far can you ride for $36.50?
Check your answer
Answer: 12 miles - With the Lesson 1.4 tiered rate, how many kWh give a $170 bill? A $90 bill?
Check your answer
Answer: 400 kWh; 225 kWhChoose the piece by comparing the bill with $120. - Plan A is given by a table: 200 kWh costs $90 and 400 kWh costs $180. Plan B is the tiered rate. Which is cheaper at 500 kWh, and by how much?
Check your answer
Answer: Plan B: $220.00 versus $225.00, cheaper by $5.00Plan A’s table shows $0.45 per kWh.
Challenge
Stretch problems. Expect to think before you write.
- Explain why f(x) = x² (all real x) has no inverse, and give a domain on which it does, with the inverse.
Check your answer
Answer: f(3) = f(−3) = 9, so 9 has two inputs. On x ≥ 0, the inverse is √x.
Review
Keep earlier skills sharp.
- Solve the system: −4x − 5y = 9 and x − 2y = 14
Check your answer
Answer: (4, −5)Check the ordered pair in both equations. - Solve and graph: |x − 1| ≥ 7
Check your answer
Answer: x ≤ −6 or x ≥ 8Distance from 1 is at least 7: x − 1 ≤ −7 or x − 1 ≥ 7.
Three Rate Cards: A Tiered Plan, a Flat Plan Shown Only as a Graph, and the State Average
Cards 1 and 2 are constructed teaching data written for this course and are illustrative; Card 3 is from EIA Electric Power Monthly Table 5.6.A (released Oct. 23, 2026) · SLS original (constructed teaching data), with public-domain figures from the U.S. Energy Information Administration
Why this reading. The workshop says “build the tiered function, its inverse and the comparison for the rate cards provided”. These are the rate cards. Cards 1 and 2 match the numbers worked in the lesson exactly, so you can check your method against a known answer before you use it on Card 3. Card 3 is real, and it is the reason the first two are worth doing.
Card 1 (illustrative). Tiered plan — given as a rate sheet
| Usage band | Price per kWh |
|---|---|
| First 300 kWh a month | $0.40 |
| Every kWh above 300 | $0.50 |
Sample bills computed from the sheet: 100 kWh → $40.00; 250 kWh → $100.00; 300 kWh → $120.00; 450 kWh → $195.00; 500 kWh → $220.00; 600 kWh → $270.00; 800 kWh → $370.00.
Check the two that the lesson states. At 450 kWh: 120 + 0.50(450 − 300) = 120 + 75 = $195.00. At 250 kWh: 0.40 × 250 = $100.00, and reading the inverse backward, a $100 bill is 100 ÷ 0.40 = 250 kWh. Both agree.
Card 2 (illustrative). Flat plan — given only as a graph
This card deliberately withholds the formula. You get the plotted points and nothing else, which is what “compare functions represented in different ways” means in practice:
| kWh | 0 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 |
|---|---|---|---|---|---|---|---|---|---|
| Point read off the graph | $0 | $45 | $90 | $135 | $180 | $225 | $270 | $315 | $360 |
The graph is a straight line through the origin, so its slope is its price per kWh: 270 ÷ 600 = $0.45 per kWh. Only now may you write F(k) = 0.45k. Recovering a formula from a graph is a step, and it has to be shown.
The comparison, worked once
| Usage | Card 1, tiered | Card 2, flat $0.45 | Cheaper |
|---|---|---|---|
| 250 kWh | $100.00 | $112.50 | tiered |
| 450 kWh | $195.00 | $202.50 | tiered |
| 500 kWh | $220.00 | $225.00 | tiered |
| 600 kWh | $270.00 | $270.00 | the same |
| 800 kWh | $370.00 | $360.00 | flat |
Solve for the break-even instead of hunting for it: 0.45k = 120 + 0.50(k − 300) gives 0.45k = 0.50k − 30, so 0.05k = 30 and k = 600 kWh, where both bills are $270.00. Below 600 the tiered plan wins; above it, the flat plan does. The table and the algebra agree, which is the point of computing both.
Card 3 (real). The state average, for scale
EIA reports, in Electric Power Monthly Table 5.6.A released October 23, 2026, the average price of electricity to Missouri residential customers:
| Period | Missouri residential average |
|---|---|
| August 2025 | 15.32 cents per kWh |
| August 2026 | 16.02 cents per kWh |
Both illustrative cards above price electricity far above the state average — nearly three times it — which is a fact about the cards, not about Missouri. Use Card 3 for one job only: compute the effective rate of each plan at a given usage — the bill divided by the kWh — and compare it with 16.02 cents. At 500 kWh the tiered plan’s effective rate is 220 ÷ 500 = $0.44 per kWh, and the flat plan’s is exactly $0.45: 0.44 ÷ 0.1602 = 2.75 and 0.45 ÷ 0.1602 = 2.81 times the Missouri average. Notice that the tiered plan’s effective rate is neither of its two tier prices: it is an average of them, weighted by how much you used in each band. That is the single most useful idea on this page, and it is the one a rate sheet never prints.
Workshop tasks
- Write Card 1 as a piecewise function with intervals, and invert each piece. Use the inverse to answer: on a $150 budget, how many kWh?
- Recover Card 2’s formula from its points, showing the slope calculation, and invert it.
- Confirm the break-even at 600 kWh algebraically and from the comparison table.
- Compute each plan’s effective rate at 200, 500 and 800 kWh, and say what happens to the tiered plan’s effective rate as usage grows, and why.
- Write the note to the 500 kWh household. Name the plan, the two bills, the break-even, and the usage that would change your advice.
Sources: EIA, Electric Power Monthly, Table 5.6.A (average retail price by state and sector, August 2026), released October 23, 2026 (eia.gov)