
decide whether a relationship is a function, use function notation to evaluate and solve, and interpret statements in function notation in context.
Instruction
Much of algebra is about how one quantity depends on another. A function is a rule that assigns to each input exactly one output. The set of allowed inputs is the domain; the set of outputs the function actually produces is the range.
Function or not? “Each student’s height on the first day of school” is a function of the student: each student has one height. “The students who are 160 cm tall” is not a function of height: the input 160 could give several students. A table represents a function if no input appears with two different outputs. A graph represents a function if every vertical line crosses it at most once, because a vertical line holds one input fixed; two crossings would mean two outputs for that input.
Function notation. Streaming video drains a phone battery. Suppose (illustratively) a full battery drops 12.5 percentage points per hour. Name the function B: B(t) is the battery percentage after t hours, and
B(t) = 100 − 12.5t
Read B(t) as “B of t“, not “B times t“. The parentheses hold the input.
- Evaluate: B(3) = 100 − 12.5(3) = 62.5. In context: after 3 hours of streaming, the battery is at 62.5%.
- Solve: when is the battery at half? Set B(t) = 50: 100 − 12.5t = 50, so 12.5t = 50 and t = 4. After 4 hours.
- Interpret a statement: B(8) = 0 says that after 8 hours the battery is empty.
Notice the difference between evaluating and solving. Evaluating gives you an input and asks for the output. Solving gives you an output and asks which input produces it.
Domain and range in context. The formula 100 − 12.5t can take any number as input, but the situation cannot. Time cannot be negative, and after 8 hours the battery is dead, so a sensible domain is 0 ≤ t ≤ 8. The range is then 0 ≤ B ≤ 100. The graph is a line segment from (0, 100) to (8, 0), not a full line. Every point on it is a solution of the equation y = 100 − 12.5t, which is what it means for this to be the graph of B.
Why the “exactly one” rule matters. If an input could give two outputs, B(3) would be ambiguous: which battery level do you mean? The one-output rule is what makes notation like B(3) meaningful and lets you use a model to make a single prediction.
Try it. Classify each relationship on the card set as a function or not, with a reason. Then, for the function C(n) = 4 + 1.5n, the cost in dollars of a burrito with n extra toppings, evaluate C(2), solve C(n) = 10, and state a sensible domain.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
For B(t) = 100 − 12.5t, what does B(6) = 25 mean?
A table in which the input 3 appears twice, once with output 5 and once with output 7, represents a function.
For C(n) = 4 + 1.5n, C(2) = , and C(n) = 10 when n = .
Give one relationship from your own life that is a function and one that is not, explaining each with the one-output rule. For the function, state a sensible domain and range with units.
How confident are you that you can decide whether a relationship is a function and use function notation to evaluate, solve and interpret?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- If f(x) = x2 + 4x, find f(1).
Check your answer
Answer: f(1) = 5Substitute, then follow the order of operations; square the input first. - If f(x) = −4x − 1, find f(−2).
Check your answer
Answer: f(−2) = 7Substitute, then follow the order of operations; square the input first. - If f(x) = −x2 + 5x + 9, find f(5).
Check your answer
Answer: f(5) = 9Substitute, then follow the order of operations; square the input first. - If f(x) = 2x2 − 5x, find f(5).
Check your answer
Answer: f(5) = 25Substitute, then follow the order of operations; square the input first. - If f(x) = 3x2 − 3x + 5, find f(−3).
Check your answer
Answer: f(−3) = 41Substitute, then follow the order of operations; square the input first. - If f(x) = x2 + 3x + 3, find f(2).
Check your answer
Answer: f(2) = 13Substitute, then follow the order of operations; square the input first. - For B(t) = 100 − 12.5t, find B(5) and solve B(t) = 25.
Check your answer
Answer: B(5) = 37.5; t = 6Evaluate: substitute. Solve: set the output to 25. - For C(n) = 4 + 1.5n, find C(3) and solve C(n) = 11.5.
Check your answer
Answer: C(3) = 8.5; n = 5
Application
Use the skill in context. Show your reasoning.
- A transit fare card starts with $40 and each ride costs $2.50 (illustrative): f(r) = 40 − 2.5r. Find f(6), and state a sensible domain and range.
Check your answer
Answer: f(6) = 25; domain: whole numbers 0 ≤ r ≤ 16; range: 0 ≤ f ≤ 40 in steps of $2.50The card is empty after 40 ÷ 2.5 = 16 rides. - Does the table {(1, 3), (2, 5), (1, 7), (4, 9)} represent y as a function of x? Explain.
Check your answer
Answer: No: the input 1 has two outputs, 3 and 7. - T(h) is the temperature in °F in Kansas City h hours after midnight on a July day. Interpret T(14) = 96, and say what T(h) = 80 asks.
Check your answer
Answer: At 2 p.m. the temperature was 96°F. T(h) = 80 asks at what time(s) the temperature was 80°F.
Challenge
Stretch problems. Expect to think before you write.
- For f(x) = 3x − 7, find a so that f(a) = f(2a) − 12, and check.
Check your answer
Answer: a = 4: f(4) = 5 and f(8) − 12 = 53a − 7 = 6a − 19 gives a = 4.
Review
Keep earlier skills sharp.
- Solve: −7x + 12 = −4x + 6
Check your answer
Answer: x = 2Move the x-terms to one side: −3x = −6. - For the data 22, 30, 32, 33, 34, 36, 40: find the mean, median, range and interquartile range. (Find the quartiles as the medians of the lower and upper halves, leaving out the overall median when the count is odd.)
Check your answer
Answer: mean = 32.43; median = 33.0; range = 18; IQR = 6.0 (Q1 = 30.0, Q3 = 36.0)
The Card Set: Twelve Relationships, and Whether Each Is a Function
Constructed teaching data written for this course, except the Missouri electricity price on Card 11, which is from EIA Electric Power Monthly Table 5.6.A (released Oct. 23, 2026) · SLS original (constructed teaching data), with public-domain figures from the U.S. Energy Information Administration
Why this reading. The lesson ends “classify each relationship on the card set”. This is the card set. Eleven of the twelve cards carry constructed data written for this course and are labeled illustrative; Card 11 carries two real figures from the U.S. Energy Information Administration. Three cards are worked for you. Do the other nine, and for each write the one-output rule in a sentence, not just yes or no.
Cards 1–3, worked
Card 1 (illustrative). A phone battery log. One phone, streaming video, read every half hour:
| Hours streaming, t | 0 | 0.5 | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 |
|---|---|---|---|---|---|---|---|
| Battery %, B | 100.0 | 93.8 | 87.5 | 81.3 | 75.0 | 68.8 | 62.5 |
A function of t. No value of t appears twice, so no input has two outputs. Check it against the lesson’s model B(t) = 100 − 12.5t: at t = 3, 100 − 37.5 = 62.5, which is the table’s last entry. Read the table backward and it is also a function of B: no battery level appears twice either.
Card 2 (illustrative). A class roster. Heights measured on the first day, in centimeters:
| Student | Alvarez | Brar | Chen | Diaz | Eze | Fong | González |
|---|---|---|---|---|---|---|---|
| Height (cm) | 160 | 172 | 155 | 160 | 181 | 167 | 160 |
Height is a function of the student — each name has exactly one height. Student is not a function of height — the input 160 returns Alvarez, Díaz and González, three outputs for one input. The same seven pairs, read one way, are a function; read the other way, they are not. Direction matters.
Card 3 (illustrative). A taqueria price list. A burrito is $4.00 plus $1.50 for each extra topping, so C(n) = 4 + 1.5n:
| Extra toppings, n | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|---|
| Price, C(n) | $4.00 | $5.50 | $7.00 | $8.50 | $10.00 | $11.50 | $13.00 |
A function. From the table, C(2) = $7.00, and C(n) = $10.00 at n = 4. The sensible domain is the whole numbers 0 through 6: you cannot order half a topping, or a seventh one this shop does not stock.
Cards 4–12, for you to classify
| Card | The relationship | Input → output |
|---|---|---|
| 4 | A vending machine: each three-character code releases one item. | code → item |
| 5 | The same vending machine, read backward. | item → code |
| 6 (illustrative) | Parking receipts: 0.4 h → $3, 1.0 h → $3, 1.2 h → $6, 2.0 h → $6, 2.5 h → $9. | hours parked → charge |
| 7 (illustrative) | The same receipts, read backward: a $6 charge came from 1.2 h and from 2.0 h. | charge → hours parked |
| 8 | A square’s side length and its area. | side (cm) → area (cm²) |
| 9 | A square’s area and its side length, for positive sides. | area (cm²) → side (cm) |
| 10 | The set of points with x² + y² = 25, a circle of radius 5. | x → y |
| 11 (real) | EIA reports the average price of electricity to Missouri residential customers as 15.32 cents per kWh in August 2025 and 16.02 cents per kWh in August 2026. | month → average price |
| 12 (illustrative) | A bus timetable in which the 7:40 departure is listed twice, once to Columbia and once to Jefferson City. | departure time → destination |
How to decide, in order
- Name the input and the output, with units. Half the wrong answers come from reading the relationship in the wrong direction, as Cards 4 and 5, 6 and 7, and 8 and 9 are built to show.
- Hunt for one input with two outputs. One is enough to settle it: Card 12 needs only the 7:40 row.
- For a graph, use the vertical line test. On Card 10, the input x = 3 gives y = 4 and y = −4, because 9 + 16 = 25 either way, so the circle is not a function of x. The vertical line x = 3 cuts it twice.
- Then state a domain that the situation allows, not one the formula allows. Card 8’s formula accepts −3; a square does not.
One caution about Card 11. The two EIA figures are monthly averages across millions of customers, so the output is a single number for each month and the relationship is a function of the month. It is not the price any one household pays, and it is not a function of the household. When a table reports an average, say so before you use it.
Sources: EIA, Electric Power Monthly, Table 5.6.A (average retail price by state and sector, August 2026), released October 23, 2026 (eia.gov)