
use a factored form to find zeros and their multiplicities, determine end behavior from degree and leading coefficient, and sketch the graph of a polynomial by hand.
Instruction
The factored form of a polynomial is a set of instructions for drawing its graph. Take
f(x) = (x + 2)(x − 1)2(x − 4).
Step 1: zeros. A product is zero exactly when one of its factors is zero, so the zeros are x = −2, 1 and 4. These are the x-intercepts.
Step 2: multiplicity. The factor (x − 1) appears twice, so 1 is a zero of multiplicity 2. Near x = 1 the squared factor is never negative, so f does not change sign: the graph touches the axis and turns back, like the vertex of a parabola. At zeros of odd multiplicity (−2 and 4 here, each multiplicity 1) the factor changes sign, so the graph crosses. A zero of multiplicity 3 also crosses, but flattens as it does, like y = x3 at the origin.
Step 3: end behavior. Multiplying out the leading terms, x · x2 · x = x4, so the degree is 4 and the leading coefficient is +1. For very large |x| the leading term dominates every other term. An even-degree polynomial with positive leading coefficient rises on both ends: as x → ±∞, f(x) → +∞. The four cases are worth reasoning out rather than memorizing: even degree means both ends go the same way; odd degree means they go opposite ways; a negative leading coefficient flips the picture.
Step 4: intercept and test points. f(0) = (2)(1)(−4) = −8, so the y-intercept is (0, −8). Test one point in each interval: f(−3) = 112 > 0, f(2) = −8 < 0, f(3) = −20 < 0, f(5) = 112 > 0. The signs agree with steps 2 and 3.
The graph crosses at −2, dips below the axis, rises to touch the axis at 1, dips again, crosses at 4 and rises. The low points between the zeros are near x ≈ −1.12 and x ≈ 3.12; finding them exactly needs calculus, so in this course you estimate them with technology (A2.APR.A.5).
A second example. g(x) = −x(x − 3)(x + 1) expands to −x3 + 2x2 + 3x. It is odd degree with a negative leading coefficient, so it rises on the left and falls on the right, crossing the axis at −1, 0 and 3.
Factor first (A2.APR.A.1 / A2.IF.A.2). When a polynomial arrives expanded, look for structure: a common factor, a difference of squares, a quadratic in disguise. x4 − 5x2 + 4 is a quadratic in x2: (x2 − 1)(x2 − 4) = (x − 1)(x + 1)(x − 2)(x + 2), with four zeros ±1 and ±2. Sketch first, then check with technology, and write down what you corrected. The correction note is where the learning is.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
At which zero does the graph of y = (x + 3)2(x − 2) touch the x-axis without crossing it?
What is the end behavior of p(x) = −2x5 + 7x2 − 1?
x4 − 5x2 + 4 factors as (x2 − 1)(x2 − ), so its zeros are ±1 and ±.
Sketch h(x) = x(x − 2)3(x + 1)2 by hand, labeling zeros, multiplicities, end behavior and y-intercept. Then graph it with technology and write one sentence about anything you corrected.
How confident are you that you can sketch a polynomial from its factored form, using zeros, multiplicity and end behavior?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- Solve: x2 + 6x + 9 = 0
Check your answer
Answer: x = −3Factor, then use the zero-product property. - Solve: x2 − 14x + 45 = 0
Check your answer
Answer: x = 5 or x = 9Factor, then use the zero-product property. - Solve: x2 + 6x + 5 = 0
Check your answer
Answer: x = −5 or x = −1Factor, then use the zero-product property. - Factor: x2 − 8x + 7
Check your answer
Answer: (x − 1)(x − 7)Look for two numbers whose product is ac and sum is b. - Factor: x2 + x − 20
Check your answer
Answer: (x − 4)(x + 5)Look for two numbers whose product is ac and sum is b. - Describe the end behavior of p(x) = −3x5 + 2x2 − 7.
Check your answer
Answer: Rises on the left, falls on the right (as x → −∞, p → +∞; as x → +∞, p → −∞).Odd degree, negative leading coefficient. - Describe the end behavior of q(x) = −(x − 1)2(x + 2)2.
Check your answer
Answer: Falls on both ends.Degree 4, leading coefficient −1. - List the zeros with multiplicities and the y-intercept of f(x) = (x − 2)2(x + 1)(x + 4).
Check your answer
Answer: 2 (multiplicity 2, touches), −1 and −4 (multiplicity 1, cross); y-intercept 16f(0) = 4 · 1 · 4. - Factor completely and give all zeros: x4 − 10x2 + 9.
Check your answer
Answer: (x − 1)(x + 1)(x − 3)(x + 3); zeros ±1, ±3A quadratic in x2: (x2 − 1)(x2 − 9). - Which end behavior does y = 2x(x − 3)3 have, and does the graph cross or touch at x = 3?
Check your answer
Answer: Rises on both ends (degree 4, positive); crosses at 3 but flattens (odd multiplicity 3).
Application
Use the skill in context. Show your reasoning.
- Write a polynomial with zeros −2 (multiplicity 2) and 3, whose graph passes through (0, −24).
Check your answer
Answer: p(x) = 2(x + 2)2(x − 3)a(4)(−3) = −24 gives a = 2. - The 16 cm by 24 cm box has V(x) = x(16 − 2x)(24 − 2x). Give its zeros and explain which interval between them is the box’s domain.
Check your answer
Answer: Zeros 0, 8 and 12; the domain is 0 < x < 8, where every dimension is positive. - A trail profile is modeled (illustrative) by h(x) = −0.002x(x − 30)(x − 70) meters, for 0 ≤ x ≤ 70. Where is the trail above the reference level (h > 0), and where below?
Check your answer
Answer: Below for 0 < x < 30, above for 30 < x < 70.Test x = 10: h = -24.0; x = 50: h = 40.0.
Challenge
Stretch problems. Expect to think before you write.
- For p(x) = x4 − 5x2 + 4, find every interval where p(x) < 0 without graphing technology.
Check your answer
Answer: −2 < x < −1 and 1 < x < 2Zeros ±1, ±2, all multiplicity 1; positive ends; the sign alternates across zeros: +, −, +, −, +.
Review
Keep earlier skills sharp.
- A geometric sequence has first term 6 and common ratio −2. Write an explicit formula, then find term 9 and the sum of the first 9 terms.
Check your answer
Answer: an = 6(−2)n − 1; a9 = 1536; S9 = 1026 - Evaluate 6 + 12 + 24 + … + 768.
Check your answer
Answer: 1,530768 = 6 · 27: 8 terms, 6(28 − 1).
Six Polynomials, Printed Out: Value Tables for Sketching Without a Device
SLS original value tables computed for Algebra 2 A Lesson 2.2; every entry is exact arithmetic on the stated factored form · SLS original
Why this reading. The lab asks you to sketch a polynomial by hand and then check the sketch against technology, writing down what you corrected. If the only check available is a graphing app, a student without a device is stuck and a student with one learns to trust the app instead of the reasoning. So the checks are printed here. Sketch first from zeros, multiplicity and end behavior; only then look at the column.
Table 1. Values at half-integer steps
| x | f = (x+2)(x−1)2(x−4) | g = −x(x−3)(x+1) | h = x(x−2)3(x+1)2 | k = x4 − 5x2 + 4 | m = (x+3)2(x−2) | p = −2x5 + 7x2 − 1 |
|---|---|---|---|---|---|---|
| −3 | 112 | 36 | 1,500 | 40 | 0 | 548 |
| −2.5 | 39.81 | 20.63 | 512.58 | 11.81 | −1.13 | 238.06 |
| −2 | 0 | 10 | 128 | 0 | −4 | 91 |
| −1.5 | −17.19 | 3.38 | 16.08 | −2.19 | −7.88 | 29.94 |
| −1 | −20 | 0 | 0 | 0 | −12 | 8 |
| −0.5 | −15.19 | −0.88 | 1.95 | 2.81 | −15.63 | 0.81 |
| 0 | −8 | 0 | 0 | 4 | −18 | −1 |
| 0.5 | −2.19 | 1.88 | −3.80 | 2.81 | −18.38 | 0.69 |
| 1 | 0 | 4 | −4 | 0 | −16 | 4 |
| 1.5 | −2.19 | 5.63 | −1.17 | −2.19 | −10.13 | −0.44 |
| 2 | −8 | 6 | 0 | 0 | 0 | −37 |
| 2.5 | −15.19 | 4.38 | 3.83 | 11.81 | 15.13 | −152.56 |
| 3 | −20 | 0 | 48 | 40 | 36 | −424 |
| 3.5 | −17.19 | −7.88 | 239.20 | 92.81 | 63.38 | −965.69 |
| 4 | 0 | −20 | 800 | 180 | 98 | −1,937 |
| 5 | 112 | −60 | 4,860 | 504 | 192 | −6,076 |
Table 2. What each column should have told you before you looked
| Zeros and multiplicity | Degree | Leading coefficient | End behavior | y-intercept | |
|---|---|---|---|---|---|
| f | −2 (1), 1 (2), 4 (1) | 4 | +1 | up, up | −8 |
| g | −1 (1), 0 (1), 3 (1) | 3 | −1 | up, down | 0 |
| h | −1 (2), 0 (1), 2 (3) | 6 | +1 | up, up | 0 |
| k | ±1 (1), ±2 (1) | 4 | +1 | up, up | 4 |
| m | −3 (2), 2 (1) | 3 | +1 | down, up | −18 |
| p | none rational | 5 | −2 | up, down | −1 |
Three things the table confirms, and one it warns you about
Even multiplicity touches. Follow h through x = −1: the values run 16.08, 0, 1.95 — positive, zero, positive. The graph came down to the axis and went back up without changing sign, because (x + 1)2 is never negative. Do the same at m‘s zero −3: −1.13 on the right, 0 at −3, and at x = −3.5 the value is −1.38. Both sides negative. Now follow h through x = 2, a zero of multiplicity 3: −1.17, 0, 3.83. The sign does change, so an odd multiplicity crosses — but notice how small the values are on either side compared with what h does by x = 3. That flatness is the multiplicity-3 signature.
End behavior is only about the leading term. Column p is worth staring at. Between x = −0.5 and x = 1.5 it wanders: 0.81, −1, 0.69, 4, −0.44. If you graphed only that window you would have no idea what p does. By x = 5 it is at −6,076 and by x = −3 at 548, because −2x5 eventually swamps 7x2. “Eventually” is doing real work in that sentence, and a window that does not reach it will lie to you.
Where the low points are. The lesson says f‘s minima sit near x ≈ −1.12 and x ≈ 3.12. The table brackets them: f(−1.5) = −17.19, f(−1) = −20, f(−0.5) = −15.19, so the lowest value is somewhere near −1 but a little to its left. Evaluating more finely gives f(−1.1213) = f(3.1213) = −20.25 exactly, and the two are mirror images because f is symmetric about x = 1. Finding such points exactly needs calculus; bracketing them with a table does not, and bracketing is enough for a sketch.
The warning. Column k shows k(−1) = 0 and k(1) = 0 and k(±2) = 0, four zeros in a degree-4 polynomial, which is the most it can have. But k arrived expanded, as x4 − 5x2 + 4, and nothing about that form announces its zeros. Seeing it as a quadratic in x2 — (x2 − 1)(x2 − 4) — is what makes the table predictable instead of surprising. Look for that structure before you plot a single point.