use nets to find the surface area of our box or bench, choose the right center and spread for our data report, and give and use feedback.
Phase 4: Build
Do Now. Every surface we line, cover or paint costs money. Read today’s reading about the layers under a playground, then answer.
How many faces does the net of a closed rectangular prism have?
The reading opens over the lesson; close it to come back to exactly where you were.
Surface area. The surface area of a solid is the total area of all its faces. A net is a flat pattern that folds into the solid, so the surface area is the sum of the areas in the net.
Worked example 1: Kwame lines his garden box. The box is 6 ft by 2 1/2 ft by 1 1/4 ft with an open top. The net has 5 faces. Bottom: 6 × 2 1/2 = 15 sq ft. Two long sides: 2 × (6 × 1 1/4) = 2 × 7 1/2 = 15 sq ft. Two short sides: 2 × (2 1/2 × 1 1/4) = 2 × 3 1/8 = 6 1/4 sq ft. Total: 15 + 15 + 6 1/4 = 36 1/4 sq ft of liner. At a sample $0.40 per square foot: 36.25 × 0.40 = $14.50.
Worked example 2: Sofia paints a storage bench. Option A includes a closed bench box for balls, 4 ft by 1 1/2 ft by 2 ft. The net has 3 pairs of matching faces: 4 × 1 1/2 = 6, 4 × 2 = 8 and 1 1/2 × 2 = 3. Surface area = 2 × (6 + 8 + 3) = 34 sq ft.
Triangular prisms. A wedge-shaped step has 2 triangle faces and 3 rectangle faces. If the triangle has sides 3, 4 and 5 ft (with the 3 and 4 ft sides at a right angle) and the wedge is 6 ft long, the triangles are 2 × (1/2 × 3 × 4) = 12 sq ft and the rectangles are 3 × 6 + 4 × 6 + 5 × 6 = 72 sq ft, for 84 sq ft in all.
Choosing measures for the data report. Look at the shape first. Aaliyah’s recess data are skewed left by the 0, so the team should report the median (20 minutes) with the IQR (10 minutes). Keisha’s plant heights are close to symmetric, so the mean with the MAD works well. Say why you chose them, in context.
Gallery critique. Post your draft. Visitors leave a sticky note with one thing that works, one question and one next step tied to our criteria: correct, clear, useful and honest.
Sketch each net before you calculate.
Materials and Costs, part 2, and your data report draft.
Draw the net of your team's box, bench or liner. Label every face with its dimensions and area. Find the total surface area and a sample cost.
Use the reading. A geotextile cloth layer must cover the whole 20 ft by 16 ft use zone from Lesson 2.21. How many square feet of cloth is that? Is this a surface-area problem or a volume problem? Explain.
Write your team's What Students Want section: one display, a center and a spread, and a sentence explaining why you chose those measures.
This is a sample story, but it shows a mistake real survey makers watch for. A team wanted to prove students would use garden boxes. They asked the 12 members of the after-school garden club to rate the idea from 1 to 10. The median was 9, and the team was ready to tell the principal that students love the plan.
During critique, a classmate asked, “Who did you ask?” The team surveyed 40 sixth graders chosen from every homeroom instead. The new median was 6, with an IQR of 4. Many students were interested, but not as many as the first survey suggested.
The team kept both results in their report, explained the difference, and changed their plan from six boxes to three, with room to add more. The principal said the honest report made the proposal easier to trust.
Think about it: Why did the first survey give such a high median? How should your team choose who to survey so the data represent all students?
Revise one thing before you leave.
Exit ticket: What is one piece of feedback you received, and what will you change because of it?
Pacing: warm-up and reading 6 minutes, mini lecture 9, case study 6, guided practice and gallery walk 13, independent 4, closure 2. Finish the data report draft for homework if needed.
Likely misconceptions: counting 6 faces for an open box; doubling a face that has no matching pair; giving surface area in cubic units; choosing the mean for skewed data because it “uses all the numbers.” Note that a 3-4-5 triangle’s area uses the two sides at the right angle (3 and 4), not the 5.
Supports: printed nets to cut and fold; a face-area table. Stretch: compare the liner area for an open box with the surface area of the same box closed (36 1/4 + 15 = 51 1/4 sq ft).
Answer guide: 6 faces; 6 × 9 = 54 sq ft; 34 sq ft; true; 2 triangles and 3 rectangles; median and IQR. Independent 2: 20 × 16 = 320 sq ft; surface area (covering), not volume (filling). Case study: the club members already like gardening, so the sample was biased; survey a random or representative group from every homeroom. Sample liner and paint prices are invented.
U.S. Consumer Product Safety Commission, Public Playground Safety Handbook · U.S. government work, public domain
The CPSC handbook strongly recommends against putting playgrounds over hard surfaces such as asphalt, concrete or hard-packed earth. Since its first edition in 1981, the handbook has warned that falls onto paved surfaces can cause serious head injuries.
If a playground must be built over a hard surface, the handbook describes layers. Right on the hard surface goes a base layer of 3 to 6 inches of loose fill, such as gravel, so water can drain. Next comes a sheet of geotextile cloth, a strong fabric that keeps layers apart. On top of that is the loose-fill surfacing, deep enough for the equipment. Inside that layer, impact mats go under busy spots such as swings and slide exits, where the fill gets kicked away.
The handbook adds that good drainage is essential, because standing water makes loose fill pack down and break down. It also suggests marking equipment posts with the minimum fill level so workers can see when to add more.
Each layer has to cover a whole area. To order geotextile cloth or a liner, a builder must know the area of every surface it touches, which is the idea behind surface area.
Source: U.S. Consumer Product Safety Commission, Public Playground Safety Handbook (cpsc.gov)