Playground or Garden Box Design Proposal
How can we design something our community wants, and prove it with data?
The mystery: Two classes have the same mean test score. Can they still be very different?
Questions we will figure out together in this unit:
use the safety rules for playground use zones and surfacing to find the area a play structure really needs.
Phase 1: Spark
Do Now. A climber is 10 feet long and 6 feet wide. Could it fit in a space that is exactly 10 feet by 6 feet? Talk with a partner for one minute about what else a play area needs.
Why do safety experts want open space around a climber?
The reading opens over the lesson; close it to come back to exactly where you were.
Meet our audience. Our proposal goes to three groups. The principal wants something safe that fits the schedule. The parent-teacher group may pay for it, so they want clear costs. The grounds crew builds and cares for it, so they need exact sizes. All three will trust numbers that show their work.
A use zone grows the rectangle. If a 6-foot use zone goes all the way around a rectangular climber, the zone adds 6 feet on the left and 6 feet on the right. So the outer length is the climber’s length + 12 feet. The same is true for the width.
Worked example 1: the space a climber needs. Priya plans for a climber 10 ft long and 6 ft wide. Step 1: outer length = 10 + 6 + 6 = 22 ft. Step 2: outer width = 6 + 6 + 6 = 18 ft. Step 3: total area = 22 × 18 = 396 ft². Step 4: the climber itself covers 10 × 6 = 60 ft², so the use zone alone is 396 − 60 = 336 ft². That is the ground that needs soft surfacing around the climber.
Worked example 2: a swing’s zone. Andre reads that a swing’s zone in front and behind must be at least twice the pivot height. Step 1: the sample swing’s pivot is 8 ft above the surfacing. Step 2: 2 × 8 = 16 ft. Step 3: so the zone reaches at least 16 ft in front of the swing and at least 16 ft behind it. A swing set needs a long rectangle of space.
Depth comes later. The handbook says loose fill packs down at least 25%. One quarter of 12 inches is 3 inches, and 12 − 3 = 9 inches. That is why the handbook says to start at 12 inches when 9 inches is needed. We will use those depths for volume later in the unit.
Our proposal checklist. Every proposal will show: a labeled plan with sizes, the area of each part, the volume of soil or surfacing, the materials for the sides, and data about what our school wants. Each number names its unit and shows its work.
Draw a quick sketch for each problem. Mark the 6-foot zone on every side before you multiply.
Add to your Designer’s Notebook.
A merry-go-round platform fits inside an 8 ft by 8 ft square. With 6 ft beyond it on every side, what is the outer square's area?
List three things the principal, the parent-teacher group and the grounds crew will each want to see in our proposal. Star the ones that need math.
A climber is 9 ft by 5 ft with a 6-foot use zone all around. The outer rectangle has an area of square feet. (Write the number without a comma.)
Real designs are not always rectangles. Next we cut and slide paper shapes to find the area of a slanted path.
Exit ticket: explain in your own words why a play area needs more ground than the equipment covers. Use one number from the reading.
Pacing: Do Now 5 min, reading 10, mini lesson 10, guided practice 10, exit ticket 5.
Accuracy: the CPSC handbook (dated December 29, 2015 on its cover letter) gives these as recommendations; the 6-foot zone quoted is for a stand-alone climber and merry-go-rounds, and the swing rule is for single-axis belt swings (twice the pivot height, front and rear). The 8-ft pivot and all equipment sizes are sample data; the handbook says pivots should be more than 47 inches and no more than 96 inches above the surfacing, so 7 and 8 ft are in range. Percent of a number was taught in Mathematics 6 I.
Likely misconceptions: adding 6 ft only once to each dimension (the zone is on both sides); subtracting the zone instead of adding it; giving the outer area when the question asks for the zone alone.
Supports: a printed sketch with the climber drawn and the zone lines dashed. Stretch: two 4 ft by 4 ft climbers sit side by side with 6 ft between them and 6 ft around the outside; find the outer rectangle (6 + 4 + 6 + 4 + 6 = 26 ft by 16 ft = 416 ft²).
Answer guide: 9 ft by 5 ft climber: 21 × 17 = 357 ft². Grounds-crew answer: the zone adds 6 ft on every side so a falling child lands on soft surfacing, making the space 22 ft by 18 ft. Audience list: principal (safety, use), parent-teacher group (cost), grounds crew (sizes, materials).
U.S. Consumer Product Safety Commission, Public Playground Safety Handbook · U.S. government work, public domain
The U.S. Consumer Product Safety Commission (CPSC) is a government agency that works to keep products safe. Its Public Playground Safety Handbook gives advice to people who plan and build public playgrounds.
A key idea is the use zone. The handbook defines it as the surface under and around equipment where a child who falls or exits would be expected to land. Use zones are also space for children to move freely.
The handbook gives sizes. For a climber that stands alone, the use zone should reach at least 6 feet in every direction from the edge of the climber. A spinning merry-go-round also needs at least 6 feet beyond its platform. For a swing that moves back and forth, the zone in front and behind should be at least twice the height of the pivot point, the place where the swing hangs from the top bar.
The ground in a use zone needs soft surfacing, such as wood chips. Loose materials like these pack down at least 25% over time. The handbook’s example: if a playground needs 9 inches of wood chips, start with 12 inches. It says never to use less than 9 inches of loose fill, except shredded rubber, where 6 inches is recommended.
Source: U.S. Consumer Product Safety Commission, Public Playground Safety Handbook (cpsc.gov)