multiply and divide decimals by 10, 100 and 1,000 and explain where the decimal point lands.
Phase 2: Investigate
Do Now. One gallon of gas costs $3.459. Without a calculator, what do 10 gallons cost? Write your guess, then explain it to a partner.
Which is the cost of 10 gallons at $3.459 a gallon?
The reading opens over the lesson; close it to come back to exactly where you were.
The digits move, not the point. When we multiply by 10, each digit becomes worth 10 times as much, so it slides one place to the left. It looks as if the decimal point jumped right. When we divide by 10, each digit becomes worth 1/10 as much and slides one place to the right.
The exponent tells how far. Multiply by 101: one place. Multiply by 102: two places. Multiply by 103: three places. Dividing works the same way in the other direction.
Worked example 1: buying gas in bulk. Grace prices gas at $3.459 a gallon. Step 1: 10 gallons: 3.459 × 10 = 34.59, so $34.59. Step 2: 100 gallons: 3.459 × 102 = 345.9, so $345.90. Step 3: 1,000 gallons: 3.459 × 103 = 3,459, so $3,459. Step 4: she checks with place value: the 3 ones became 3 thousands when multiplied by 1,000.
Worked example 2: milliliters to liters. Omar’s water bottle holds 750 milliliters. How many liters? Step 1: a milliliter is one thousandth of a liter, so divide by 1,000. Step 2: 750 ÷ 103: each digit slides three places right. Step 3: the 7 hundreds become 7 tenths and the 5 tens become 5 hundredths. Step 4: 750 ÷ 1,000 = 0.75 liters.
Fill empty places with zeros. 4.5 ÷ 100 = 0.045. The 4 moved from the ones place to the hundredths place, so we write a 0 in the tenths place and a 0 before the decimal point.
Why “add a zero” fails. For whole numbers, 25 × 10 = 250 looks like adding a zero. But 2.5 × 10 is not 2.50. 2.50 is the same as 2.5! The real answer is 25, because each digit moves one place left.
Write each number in a place-value chart and slide the digits. Check by asking: should the answer be bigger or smaller?
Show the slide in a place-value chart for at least two of these.
Find each answer: 0.9 × 10, 0.9 × 100, 0.9 × 1,000, 9 ÷ 10, 9 ÷ 100, 9 ÷ 1,000. What pattern do you see?
A recipe uses 250 milliliters of milk. How many liters is that?
The 9/10 cent on a gas sign is $0.009 per gallon. What does it add to a bill for 10 gallons, 100 gallons and 1,000 gallons? Show each with a power of 10.
Powers of 10 slide digits left or right. Next time we practice reading and writing decimals three ways, using real gas prices.
Exit ticket: what is 34.59 ÷ 10? Is the answer bigger or smaller than 34.59, and why?
Pacing: Do Now 5 min, reading 6, mini lesson 12, guided practice 12, exit ticket 5.
Accuracy: prefix meanings and the symbol rules are from the NIST page; 1,000 mL = 1 L follows from milli = one thousandth. Products stay within the eligible content (multiplying and dividing by powers of 10 is part of CC.2.1.5.B.1, not general decimal multiplication).
Likely misconceptions: “add a zero” for decimals; moving the point the wrong way when dividing; dropping place-holder zeros (writing 0.45 for 4.5 ÷ 100).
Supports: a sliding place-value strip (digits on a paper strip that moves under a fixed decimal point). Stretch: 0.3 × 103 ÷ 102 = 3.
Answer guide: 9, 90, 900, 0.9, 0.09, 0.009: multiplying by a bigger power of 10 slides farther left, dividing slides farther right. 9/10 cent: 10 gal = $0.09, 100 gal = $0.90, 1,000 gal = $9. Exit ticket: 3.459, smaller, because each digit is worth 1/10 as much.
National Institute of Standards and Technology, Metric (SI) Prefixes · U.S. government work, public domain
NIST’s table of metric prefixes also has prefixes for units smaller than one. Deci means one tenth, as in decimeter. Centi means one hundredth, as in centigram. Milli means one thousandth, as in milliliter.
So one milliliter is one thousandth of a liter, and it takes 1,000 milliliters to make one liter. To change milliliters to liters, you divide by 1,000. To change liters to milliliters, you multiply by 1,000.
NIST points out a rule for writing symbols. The symbols for the small prefixes are all lowercase letters, like m for milli and c for centi. Most symbols for the big prefixes are capital letters, but k for kilo, h for hecto and da for deka are lowercase too.
NIST also explains a special case. Because the kilogram is the base unit for mass, other mass units are made from the word gram. A thousandth of a gram is written 1 mg, a milligram.
Source: National Institute of Standards and Technology, Metric (SI) Prefixes (nist.gov)