write powers of 10 with exponents and explain the pattern of zeros when a whole number is multiplied by a power of 10.
Phase 2: Investigate
Do Now. Find 10 × 10. Then find 10 × 10 × 10. Then 10 × 10 × 10 × 10. What do you notice about the zeros?
How many zeros will 10 × 10 × 10 × 10 × 10 have?
The reading opens over the lesson; close it to come back to exactly where you were.
A short way to write tens. Mathematicians write 10 × 10 × 10 as 103. The 10 is the base. The small raised 3 is the exponent. It tells how many 10s are multiplied. We read 103 as “ten to the third power.”
The zero pattern. 101 = 10, 102 = 100, 103 = 1,000 and 104 = 10,000. For a power of 10, the exponent matches the number of zeros. That works because each extra factor of 10 shifts every digit one place to the left.
Worked example 1: multiplying by 103. Noor finds 42 × 103. Step 1: 103 = 1,000. Step 2: multiplying by 1,000 makes each digit worth 1,000 times as much, so each digit moves three places to the left. Step 3: the 4 tens become 4 ten thousands and the 2 ones become 2 thousands. Step 4: 42 × 103 = 42,000.
Worked example 2: a metric unit. Caleb reads that a kiloliter is 103 liters. How many liters are in 5 kiloliters? Step 1: write 5 × 103. Step 2: 103 = 1,000. Step 3: 5 × 1,000 = 5,000. Step 4: 5 kiloliters is 5,000 liters.
Watch the zeros you already have. 250 × 103 = 250,000. That answer ends in four zeros: one was already in 250 and three came from 103. Count carefully.
Not times the exponent. 103 does not mean 10 × 3. 10 × 3 = 30, but 103 = 1,000. The exponent counts factors of 10.
Use a place-value chart or a calculator only to check, after you predict.
Look for the pattern, then explain it.
Make a table: 7 × 101, 7 × 102, 7 × 103, 7 × 104. Write each product and describe the pattern.
A gigawatt is 109 watts. Which is 109?
Which is greater, 3 × 104 or 40 × 102? Show how you know.
Exponents count the 10s. Next time we multiply and divide decimals by powers of 10, and our gas price comes back.
Exit ticket: write 10 × 10 × 10 × 10 × 10 with an exponent and as a whole number.
Pacing: Do Now 5 min, reading 7, mini lesson 10, guided practice 13, exit ticket 5.
Accuracy: prefix factors and the 1795/2022 history come from the NIST page. Exponents stay whole numbers, as the eligible content says; do not introduce negative exponents, even though NIST’s table shows them.
Likely misconceptions: 103 = 30; “just add zeros” without understanding (it breaks for decimals next lesson); miscounting zeros already in the factor.
Supports: a strip with 101 through 106 written in both forms. Stretch: 102 × 103 = ? (105).
Answer guide: table: 70, 700, 7,000, 70,000; each product is 10 times the one before and has one more zero. 3 × 104 = 30,000 and 40 × 102 = 4,000, so 3 × 104 is greater. Exit ticket: 105 = 100,000.
National Institute of Standards and Technology, Metric (SI) Prefixes · U.S. government work, public domain
NIST lists the metric prefixes in a table. For each one it gives a word, a symbol and a factor, the number the unit is multiplied by. NIST writes each factor as a power of 10.
Kilo is 103, which is one thousand. Hecto is 102, one hundred. Deka is 101, ten. Bigger prefixes keep the pattern going. Mega is 106, one million, and giga is 109, one billion. NIST gives the gigawatt as an example of a unit with that prefix.
The small raised number is called an exponent. It tells how many 10s are multiplied together. So 103 means 10 × 10 × 10.
The page also tells some history. The first eight prefixes were adopted in 1795. New ones were added several times, most recently in 2022, and now there are 24 prefixes in all.
Source: National Institute of Standards and Technology, Metric (SI) Prefixes (nist.gov)