find the area and perimeter of an L-shaped zone by breaking it into rectangles, and name the quadrilaterals in our plan.
Phase 4: Build
Do Now. A box kite is built from sticks and string. Read how it is put together. Then answer.
The reading says a box kite has four main leg pieces. What is true about them?
The reading opens over the lesson; close it to come back to exactly where you were.
Break it into rectangles. A reading nook might be shaped like the letter L. We cannot multiply one length by one width. Instead we split the L into two rectangles, find each area, and add.
Worked example 1: Mia’s L-shaped nook. Mia’s sample nook is an 8 by 5 rectangle with a 3 by 4 rectangle on top of its left end. Area: 8 × 5 = 40 and 3 × 4 = 12. 40 + 12 = 52 square feet. She checks with a different split: a 3 by 9 rectangle and a 5 by 5 square. 27 + 25 = 52. Perimeter: she walks around all six sides: 8 + 5 + 5 + 4 + 3 + 9 = 34 feet.
Area models work the same way. A 7 by 8 rug can be split into 7 by 5 and 7 by 3. So 7 × 8 = 7 × 5 + 7 × 3 = 35 + 21 = 56.
Worked example 2: Carlos makes the shape key. Our plan needs a key that names each shape. Carlos sorts his zones. A 5 by 5 calm corner has 4 equal sides and 4 square corners, so it is a square, a rectangle and a rhombus. A 4 by 7 rug is a rectangle. A welcome mat with 4 equal 3-foot sides and slanted corners is a rhombus, but not a rectangle. A table with 4 sides of 6, 3, 4 and 3 feet is none of these. All four share one attribute: 4 straight sides. So all four are quadrilaterals.
A rhombus mat still has a perimeter. We can add its sides: 3 + 3 + 3 + 3 = 12 feet. We do not find its area in grade 3, so our key gives its perimeter only.
Split shapes into rectangles. Sort shapes by their attributes.
Add an L-shaped nook and a shape key to your plan.
Draw an L-shaped nook made of a 6 by 4 rectangle with a 3 by 2 rectangle on top of its left end. Find the area two ways. Then find the perimeter by adding all six sides.
Make a shape key for your plan. For each zone, write every name that fits: square, rectangle, rhombus or quadrilateral.
Big shapes break into small rectangles. Many shapes share one family name.
Exit ticket: is a square a rectangle? Is a rectangle always a square? Use attributes to explain.
Pacing: warm-up and reading 6 minutes, mini lecture 10, guided practice 14, independent 8, closure 2.
Likely misconceptions: multiplying the two longest sides of an L (8 × 9); counting the overlap twice; thinking a square is not a rectangle; thinking a rhombus tipped on its point is a different shape.
Supports: cut-out L-shapes students can fold or cut along a split line; a sorting mat with overlapping circles for rhombus and rectangle. Stretch: find a third way to split Mia’s L.
Answer guide: warm-up the legs are equal; 24 + 6 = 30; square; true; 3; 4 different sides and no square corners; 4 sides. Independent: 24 + 6 = 30 square feet (or 3 × 6 = 18 plus 3 × 4 = 12); sides 6, 4, 3, 2, 3 and 6 give 24 feet. Exit ticket: a square has 4 square corners, so it is a rectangle; a rectangle needs 4 equal sides to be a square. Mia’s L: corners (0,0), (8,0), (8,5), (3,5), (3,9), (0,9).
NASA Glenn Research Center, Beginner's Guide to Aeronautics: Kite Construction · U.S. government work, public domain
NASA says a kite is a lot like an airplane. Both are heavier than air. The Wright brothers used kites and gliders to learn how to fly before their first airplane flight.
A kite has two main parts. The surfaces are covered with thin paper, plastic or cloth. They push the wind down and help lift the kite. The structure is the frame inside that holds the surfaces up.
NASA shows a simple box kite. Its structure is made from several sticks and some string. The sticks can be light, strong wood, like balsa or bamboo, or a light plastic tube. A box kite has four main leg pieces that are all the same length. It also has four cross pieces, each made from two sticks. String wrapped around the legs holds it all together.
The frame must be strong enough for wind but light enough to fly. To save weight, some box kites use only two cross pieces. A string called a bridle connects the kite to the flying line.
Source: NASA Glenn Research Center, Beginner's Guide to Aeronautics: Kite Construction (grc.nasa.gov)