show what we know about area and quadrilaterals in a check-in, and plan the parts, areas and shape key of our Dream Classroom Floor Plan.
Phase 3: Make Sense
Do Now. Look back at our Wonder Board. Which questions can we answer now? Which ones still need Part 2?
Which Wonder Board question still needs Part 2?
The reading opens over the lesson; close it to come back to exactly where you were.
Where we are. In Part 1 we learned to measure area by counting squares, to multiply side lengths, to split rectangles and add, and to sort quadrilaterals. Today we check our skills and plan our project.
The project. Each Floor Planner draws a Dream Classroom Floor Plan on grid paper. Each grid square is 1 square foot. The plan shows at least 5 areas, each a rectangle or an L shape, labeled with its name and area in the center, like HABS plans. A shape key sorts the quadrilaterals you used.
Worked example 1: a labeled area. Maya plans a meeting rug 6 feet by 8 feet. Step 1: she splits 8 into 5 + 3: 6 × 5 = 30 and 6 × 3 = 18. Step 2: 30 + 18 = 48. Step 3: she writes Meeting Rug, 48 square feet in the center. Step 4: she puts the side lengths, 6 ft and 8 ft, along the outside edges, as the HABS guide says.
Worked example 2: a shape key. Diego lists his shapes. Step 1: the meeting rug has 4 square corners and unequal sides: rectangle. Step 2: each floor tile has 4 equal sides and 4 square corners: square, which is also a rectangle and a rhombus. Step 3: a trapezoid table: a quadrilateral that is none of these. Step 4: he draws each shape in the key with its name.
Our checklist so far. Room outline; at least 5 labeled areas; every area correct in square feet; side lengths on the edges; shape key with at least 3 kinds of quadrilaterals; north arrow; title.
Still to come. In Part 2 we add border trim, budgets and the fringe question, and we present to the principal.
Check-in: work alone, then compare with a partner.
Start your plan sketch.
Sketch your classroom outline on grid paper. Draw your 5 areas inside it and write each area's name and square feet in its center.
You want a 48-square-foot stage that is 6 feet wide. How long should it be?
Draft your shape key. Name at least 3 kinds of quadrilaterals you used and one attribute of each.
Part 1 is done. In Part 2 we measure border trim, finish the Dream Classroom Floor Plan and present it to the principal.
Exit ticket: which skill from Part 1 will matter most for your floor plan? Explain with an example from your sketch.
Pacing: Wonder Board 4 min, reading 6, mini lesson 8, check-in 15, planning and exit ticket 7.
Use as a formative check of all five Part 1 targets: counting squares (A.5:1a, cubby area), multiplying side lengths (A.5:2a, art table and stage), area models and splitting (A.5:3a, 8 × 7 and the L nook), shared attributes (A.1:1a, rectangle, rhombus, trapezoid) and quadrilateral categories (A.1:2a, rhombus corners). Regroup students who miss two or more items on the same target before Part 2.
Accuracy: HABS Guidelines (NPS, 2008): plans measured about 4′-0″ above the floor; each wall measured with a continuous string corner to corner; each drawing has a title and scale; a pair of scale bars (English and metric); a north arrow on plans; horizontal and vertical dimension strings placed off to the side, top or bottom; avoid excessive dimensioning; room names in the center; stairs labeled UP or DOWN. Scale drawing is not a grade 3 skill, so our plans use one grid square = 1 square foot instead of a scale bar.
Likely misconceptions: writing side lengths inside the area instead of the area; labeling area in feet; calling a square “not a rectangle.”
Answer guide: plans should list 5 areas with correct products (sides up to 10) and a key with at least 3 kinds of quadrilaterals. Exit tickets vary.
National Park Service, HABS Guidelines: Recording Historic Structures and Sites with HABS Measured Drawings · U.S. government work; the document states it is copyright-free and in the public domain
The HABS guide tells planners how to measure and label a building plan. Here are some of its rules.
Measuring. Plans are measured about 4 feet above the floor. Each wall of every room is measured with one long tape or string, from corner to corner, so doors, windows and fireplaces are measured along the way.
Labels. Every drawing needs a title and a note telling its scale. A plan needs a north arrow. It also needs a pair of scale bars, one in inches and feet and one in metric units.
Dimensions. Plans usually have lines of measurements going across and going up and down. These go off to the side, top or bottom of the drawing, not across it. The guide warns against too many numbers: label the main parts, not every opening. Room names go in the center of each room.
Stairs. Stairs get an arrow marked UP or DOWN.
Source: National Park Service, HABS Guidelines: Recording Historic Structures and Sites with HABS Measured Drawings (nps.gov)