test four-sided shapes to name squares, rectangles and rhombuses as quadrilaterals, and draw a quadrilateral that is none of these.
Phase 2: Investigate
Do Now. Hold a square sticky note flat. Now turn it so one corner points straight up. Is it still a square, or is it a new shape?
A square turned on its corner is…
The reading opens over the lesson; close it to come back to exactly where you were.
Quadrilaterals. A quadrilateral is a polygon with 4 sides and 4 corners. Quad means four. Every rug, tile and room in our plan so far is a quadrilateral.
Three special kinds. A rectangle has 4 square corners. A rhombus has 4 sides that are all the same length. A square has 4 square corners and 4 equal sides. Test corners with the corner of an index card. Test sides with a ruler.
Worked example 1: testing a warning sign. Hana tests a paper model of a 30-inch diamond sign. Step 1: sides: all 4 sides are 30 inches, so it is a rhombus. Step 2: corners: the index card fits every corner exactly, so all 4 are square corners. It passes the rectangle test too. Step 3: it has 4 equal sides and 4 square corners, so it is a square, just as the manual says.
Worked example 2: a quadrilateral that is none of these. Luis draws a shape on dot paper with 4 sides of different lengths and no square corners. Step 1: it has 4 sides, so it is a quadrilateral. Step 2: the sides are not all equal, so it is not a rhombus or a square. Step 3: no corner is a square corner, so it is not a rectangle. It is a quadrilateral that is none of the three special kinds.
Other quadrilaterals. A trapezoid sign and a kite shape are quadrilaterals too. Many of them are not rhombuses, rectangles or squares.
Turning does not change a shape. A square on its corner looks different, but its sides and corners are the same. Always test the attributes, not the way the shape is turned.
Build each shape on a geoboard or dot paper. Test the corners and sides.
Make a quadrilateral collection.
On a geoboard or dot paper, make one square, one rectangle that is not a square, one rhombus that is not a square, and one quadrilateral that is none of these. Label each one.
A sample rug has 4 square corners. Its long sides are 6 feet and its short sides are 4 feet. What is the best name for it?
Look at the floor tiles and rugs in our room. Which kind of quadrilateral is each one? How did you test it?
We found the quadrilaterals on our plan. Next we go back to area and explain why our methods work.
Exit ticket: draw a rhombus that is not a square. How is it different from the diamond warning sign?
Pacing: Do Now 4 min, reading 7, mini lesson 9, geoboard lab and guided practice 15, exit ticket 5.
Accuracy: MUTCD 2009 Section 2C.03 says warning signs shall be diamond-shaped (square with one diagonal vertical) with a black legend and border on a yellow background, and that a sign larger than the oversized size may be diamond, rectangular or square. Table 2C-2 lists many diamond signs at 30 x 30 inches for conventional single-lane roads; Section 2C.04 requires at least 36 x 36 inches on multi-lane conventional roads with posted speeds above 35 mph. The 24 by 30 inch rectangle and the rugs are sample data.
Likely misconceptions: “a diamond is not a square”; thinking a rhombus must be tilted; thinking all quadrilaterals have square corners.
Supports: an index card as a corner tester; a quadrilateral test checklist (4 sides? square corners? equal sides?). Stretch: can a shape be a rhombus and a rectangle but not a square? (No: that would be a square.)
Answer guide: the none-of-these shape must have 4 sides, unequal sides and no 4 square corners (a kite, a trapezoid or a lopsided shape). Exit ticket: a rhombus that is not a square has slanted corners; the diamond sign has square corners.
Federal Highway Administration, Manual on Uniform Traffic Control Devices (2009), Chapter 2C, Warning Signs · U.S. government work, public domain
Warning signs tell drivers about something ahead, like a sharp curve, a hill or people crossing. Chapter 2C of the national sign manual gives the rules for these signs.
The manual says warning signs must be diamond-shaped. Then it explains what it means: a square with one diagonal straight up and down. A diagonal is a line from one corner to the opposite corner. So a diamond warning sign is really a square standing on one corner.
Warning signs have black words or pictures and a black border on a yellow background.
The manual also lists sizes. Many warning signs on smaller roads are 30 inches wide and 30 inches tall. On busier roads with more lanes and faster speeds, diamond warning signs must be at least 36 inches by 36 inches. A warning sign that is extra large may be a rectangle or a square set flat instead of a diamond.
Source: Federal Highway Administration, Manual on Uniform Traffic Control Devices (2009), Chapter 2C, Warning Signs (mutcd.fhwa.dot.gov)