build tables of equivalent ratios, find missing values, and use the tables to compare two showerheads.
Phase 2: Investigate
Do Now. A standard showerhead lets out 5 gallons of water every 2 minutes. How much water comes out in 4 minutes? In 10 minutes? Write how you know.
How many gallons come out in 10 minutes?
The reading opens over the lesson; close it to come back to exactly where you were.
Equivalent ratios. A standard showerhead uses 2.5 gallons per minute. With whole numbers, that is 5 gallons every 2 minutes, or a ratio of minutes to gallons of 2:5. Ratios that describe the same rate, like 2:5, 4:10 and 6:15, are called equivalent ratios.
The rule for a ratio table. To make an equivalent ratio, multiply (or divide) both quantities by the same number. Adding the same number to both does not work, because the groups would no longer match.
Worked example 1: a standard showerhead table. Keisha builds a table of minutes and gallons. Step 1: start with 2 minutes, 5 gallons. Step 2: ×2 gives 4 minutes, 10 gallons. Step 3: ×3 gives 6 minutes, 15 gallons; ×4 gives 8 minutes, 20 gallons; ×5 gives 10 minutes, 25 gallons. Step 4: she checks one row: 25 ÷ 10 = 2.5 gallons per minute, which matches the EPA rate.
Worked example 2: missing values. Omar uses a WaterSense showerhead at 2 gallons per minute, a ratio of 1:2. Step 1: an 8-minute shower is 8 groups of 1 minute, so it uses 8 × 2 = 16 gallons. Step 2: for the standard table, how many minutes use 15 gallons? 15 is 3 groups of 5, so the time is 3 groups of 2 minutes, or 6 minutes.
Comparing with tables. Put both tables side by side. At 10 minutes, the standard showerhead uses 25 gallons and the WaterSense one uses 20. That saves 5 gallons on one 10-minute shower.
A real check. The EPA says an average family uses nearly 40 gallons a day for showers. At 2.5 gallons per minute, 40 gallons is 16 minutes of showering, because 16 × 2.5 = 40.
Use your ratio tables. Standard: 2 minutes, 5 gallons. WaterSense: 1 minute, 2 gallons.
Make each table with at least 5 rows.
Make a ratio table for the WaterSense showerhead from 1 to 10 minutes. Next to it, write the standard showerhead's gallons for the same minutes. Circle the row where the difference is 3 gallons.
For the standard showerhead, minutes of showering use 35 gallons (write a whole number).
A sample lemonade uses 2 scoops of mix for every 3 cups of water. Make a table that goes up to 12 cups of water. How many scoops go with 12 cups?
Tables of equivalent ratios grow by multiplying. Next we plot the rows of a table as points on a graph.
Exit ticket: fill in the missing values: minutes 2, 6, ___; gallons 5, ___, 40 (standard showerhead).
Pacing: Do Now 5 min, reading 7, mini lesson 10, tables and guided practice 13, exit ticket 5.
Accuracy: 2.5 gpm, 2.0 gpm, nearly 17 percent, nearly 40 gallons a day, 1.2 trillion gallons, 2,700 gallons, 11 days and 260 billion gallons are from the EPA WaterSense page (updated March 3, 2026). The 2:5 ratio is our whole-number form of 2.5 gpm. Trail mix and lemonade are sample data.
Likely misconceptions: additive reasoning (2:5 → 4:7); multiplying only one column.
Supports: arrows labeled ×2, ×3 between rows. Stretch: at 2.5 gpm, how long is a 45-gallon use? (18 minutes.)
Answer guide: the difference is 0.5 gallons per minute, so it is 3 gallons at 6 minutes (15 vs 12). Lemonade: 2:3, 4:6, 6:9, 8:12, so 8 scoops go with 12 cups. Exit ticket: 16 minutes; 15 gallons.
U.S. Environmental Protection Agency, WaterSense: Showerheads · U.S. government work, public domain
The U.S. Environmental Protection Agency, or EPA, runs a program called WaterSense. It labels products that use less water but still work well.
The EPA says a standard showerhead uses 2.5 gallons of water per minute. A showerhead with the WaterSense label can use no more than 2.0 gallons per minute. Gallons per minute is a rate, and it is often written gpm.
Showers use a lot of water. The EPA says showering is nearly 17 percent of the water used inside homes. An average family uses nearly 40 gallons a day just for showers, and the whole country uses nearly 1.2 trillion gallons a year.
Switching showerheads can help. The EPA says an average family could save 2,700 gallons a year with a WaterSense showerhead. Less hot water also means less energy, and the family could save enough electricity to power a house for 11 days. If every U.S. home put one in, the EPA says the country could save more than 260 billion gallons of water a year.
Source: U.S. Environmental Protection Agency, WaterSense: Showerheads (epa.gov)